Trracer front thumbscrew?

Hawkeye20 · 09-09-2012, 04:25 PM

Anyone know where I can find one? I checked Titus and Bacci, no luck.

Disco · 09-09-2012, 05:15 PM

CCI? They're the same as the Phantoms, are they not?

Hawkeye20 · 09-09-2012, 05:30 PM

Nope. I tried my phantom's screw and it didn't work. The traccer screws have a slightly larger diameter.

Blender · 09-10-2012, 11:32 PM

You could just get a screw from the hardware store and cut it to length. That's what I wound up doing.

Hawkeye20 · 09-10-2012, 11:40 PM

Mind telling me what threads they are?

Rolling Thunder 67 · 09-11-2012, 12:09 AM

Just went and checked the thread of my Maverick. Front thumb screw is a 10-32 NF.
hope this helps.Good luck.

The Inflicted · 09-11-2012, 08:43 AM

Quote:

Originally Posted by Hawkeye20

Nope. I tried my phantom's screw and it didn't work. The traccer screws have a slightly larger diameter.

Did you try the rear Phantom screw?
The front and rear grip screws on a Phantom are of varying diameters.
Rear is 10-32, but the front is 8-32.

dukie · 09-11-2012, 08:44 AM

Quote:

Originally Posted by Hawkeye20

Nope. I tried my phantom's screw and it didn't work. The traccer screws have a slightly larger diameter.

did you try a rear CCI frame screw as well as a front? the front is an 8-32, the rear is a 10-32. I can't see it being a 1/4" screw, that would be sort of large.

09-11-2012, 12:09 AM	#6 (permalink)
Rolling Thunder 67 Old School Fool Join Date: Jul 2009 Location: Cobourg,Ontario,Canada	Just went and checked the thread of my Maverick. Front thumb screw is a 10-32 NF. hope this helps.Good luck. __________________ http://www.mcarterbrown.com/forums/f...-feedback.html

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

09-10-2012, 11:32 PM	#4 (permalink)
Blender Active Member Join Date: Feb 2007 Location: Laramie, WY/ Duluth, MN	You could just get a screw from the hardware store and cut it to length. That's what I wound up doing.