mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Ask The Experts (http://www.mcarterbrown.com/forums/ask-experts/)
-   -   compatibility of hyper2 vs hyper3 (http://www.mcarterbrown.com/forums/ask-experts/215549-compatibility-hyper2-vs-hyper3.html)

original farside 10-08-2012 09:31 PM

compatibility of hyper2 vs hyper3
 
does any one know if the brass reg piston is the same from one to another? i need one for a hyper 2 reg, but all i can find are the hyper 3 pistons.

this is what we are talking about
[IMG]http://i404.photobucket.com/albums/p...e/hyperreg.jpg[/IMG]

nerdcore 10-10-2012 04:22 PM

Ask Dye, they respond pretty fast. I'm gonna guess no, though.

Nevit 10-10-2012 07:19 PM

What you have pictured is a "brass reg seat housing", not a piston. The actual pistons are very different make sure you tell Dye the right thing when you order one.

They can be used in either reg the difference is in the length. All that affects is the adjustment range, not exactly pressure but how far and how sensitive the adjustments are.

Just be sure to test the output pressure before installing it on a gun, you should be fine.

Did you loose one? Or is yours destroyed? The rubber tip is replaceable if that's all that's wrong.
Either way I have lots here at the shop in various lengths I can send you.
Measure yours if you have it and PM me if you can't find one.


All times are GMT -4. The time now is 11:10 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC