mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Ask The Experts (http://www.mcarterbrown.com/forums/ask-experts/)
-   -   K Framed P68SC (http://www.mcarterbrown.com/forums/ask-experts/217877-k-framed-p68sc.html)

ghosroth 11-06-2012 01:48 AM

K Framed P68SC
 
Hey guys there will be a P68SC arriving at my house very soon now my question s will my k frame of my pgp 2 fit the P68SC or be altered to fit Thnx

Brassballs 11-06-2012 02:06 AM

it will fit

Whee McGee 11-06-2012 02:40 AM

It has Sheridan Spacing, since it fits your PGP, so you will have no problems getting it to fit.
Here's some shots to keep you anticipating! First one is mine, so you are in great company!
http://i217.photobucket.com/albums/c...s/PICT1134.jpg
http://i277.photobucket.com/albums/k...e/IMG_0189.jpg
http://www.mcarterbrown.com/gallery/...m/101_6954.JPG

ghosroth 11-06-2012 03:20 AM

Tried to fit on my pgp but that one did not cock even after swapping hammer with my pgp2k that's why ask

chplnstone 11-06-2012 09:10 AM

it should fit anything using a standard sheridan p-series trigger frame, they haven't changed much since the 80's... if it isn't cocking, the rva screw may need to be backed out a bit

ghosroth 11-06-2012 10:30 AM

Quote:

Originally Posted by chplnstone (Post 2526114)
it should fit anything using a standard sheridan p-series trigger frame, they haven't changed much since the 80's... if it isn't cocking, the rva screw may need to be backed out a bit

Yeah that's my point the pgp 2 which the frames on now s a cartridge valve and the P68SC a non cartridge valve

chplnstone 11-06-2012 10:52 AM

valves are the same overall length, cocking issues with the pgp2k are typically the back block being screwed in too far, but with a k-frame that shouldn't be an issue... other easy-solve problem is the rva being screwed in too far, preventing the hammer from being able to come far enough to hang on the sear. if it's still not cocking, pull the k-frame off the marker and make sure the hammer physically fits between the sear and the back block of the frame.

Yellow5 11-06-2012 10:57 AM

Sometimes going from a longer gun like a P68 to a short one like the PGP, the K-frame may interfere with your pump handle, since I think the K-frame is a little wider than the standard frame. This prevents your pump stroke from going all the way back far enough to catch the sear. Try taking off the pump handle and cocking it just by pulling the bolt back. If that works, then sand or otherwise widen the slot on you pump handle so that it will fit around the front edge of the K-frame.

ghosroth 11-06-2012 11:20 AM

Will try again tonight Thnx for all the input guys i'll keep you posted
Edit :
Success thank all you guys I shortened. The spring and widened the pumphandle and it works Like a charme

Before
http://i890.photobucket.com/albums/a...8092011364.jpg
After
http://i890.photobucket.com/albums/a...106_204201.jpg

chplnstone 11-06-2012 06:21 PM

doh! good catch yellow5, i usually extend the pump rod and forgot that the frame's wider!


All times are GMT -4. The time now is 10:23 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC