|Ask The Experts You ask the tough questions|
| ||Thread Tools||Search this Thread|
|11-11-2012, 04:10 PM||#1 (permalink)|
Join Date: Dec 2011
Location: new york
Nelly on mid pressure
I own a nelspot 007 that I have set up for back bottle, I normally just run a 13/3k on the back for a light set up, but I was wondering if I could run my 45/4500 tank that has a ninja adjustable reg sitting at 480 with my nelly. Would it not be a high enough pressure?
Nelspot 007 Back Bottled>
Check out Liberty Paintball in NY-
|11-12-2012, 01:17 PM||#2 (permalink)|
Join Date: Sep 2008
Location: Huntington Beach, CA
You would likely have to change the springing if you wanted to go that low of a pressure.
|11-13-2012, 10:53 PM||#3 (permalink)|
Join Date: Dec 2010
Location: Fascist Valley
You'll almost def have to change springs. And do other mods. Search around here, the CCI forum and pump forums for a lot of stuff about modifying nelson based valve systems for mid and low pressure. You could run the 480psi tank with new springs at a minimum, but it might not work too well efficiency/consistency wise, if at all at 260-280fps. You'll likely have to do a little work on the powertube, valve and valve housing to get it working well at that pressure. No drop in upgrades (other than springs of course) that'll get you're nelson running below 500psi, although I've had a freak phantom that runs well (with new springs) at 550-600psi, so you never really know till you try
I need YOU to build me a custom Sheridan body! or Sell Me Your PMI-I, P68-SC or P-12 Complete Gun or Just the Body!
"Have You Seen Molly?"
Fall in Love With Your [Working] Thumper All Over Again!
WTB Sheridan Parts/Upgrades (Sight Rail & Cooper-T bolts/CA adapters/ASAs)
|11-13-2012, 10:56 PM||#4 (permalink)|
Stock Class Aficionado
Medium pressure (500 psi or so) is pretty easy. You can do that on most Nelsons with spring changes alone. It is when you get down lower than you start to see problems with unmodified setups.
Make sure you have a good paint-to-bore match though, you want all the gas you can get behind the ball.
|11-14-2012, 11:42 AM||#5 (permalink)|
Join Date: Dec 2008
Location: Houston, TX
some things are stickier than others
|Thread Tools||Search this Thread|