|Ask The Experts You ask the tough questions|
| ||Thread Tools||Search this Thread|
|12-10-2012, 06:57 PM||#1 (permalink)|
Join Date: Feb 2009
Location: Los Angeles
Help with barracuda leak please
My barracuda developed a down the barrel leak over the weekend. Its a pretty big leak. It was sealed and then all of a sudden big leak down barrel. I don't know too much about these. So, what part do I need to replace?
|12-11-2012, 03:37 PM||#2 (permalink)|
Join Date: Aug 2009
Location: Charlotte, NC
There is only three parts that can be, (if it is the same as a BE Nightmare)
Cupseal, two o-rings on the outside, one on the inside.
The question of what sizes to put in there has baffled me for a very long time. Maybe I'm missing some obvious problem?
Anyway, those are the parts that need replacing on the valve
|Thread Tools||Search this Thread|