|p8ntninja ||01-01-2013 11:30 PM |
Pure Energy Reg Output Pressure?
I have a 13/3K PE HPA tank and was curious what the output pressure of the reg is. I would like to use it in conjunction with a upcoming Hammer 7 purchase but am sure I will get usable velocity from it. Any info is appreciated!
|redlaser666 ||01-02-2013 01:52 AM |
Most PE regs are preset around 850psi. They may vary though and may be a low as 800psi
|MIballer ||01-02-2013 06:15 AM |
750 to 900 psi. Will work perfect for blow back based markers.
|p8ntninja ||03-23-2013 09:55 PM |
Bumping for one of two reasons. I was at the 'local' shop and decided to ave them test the output pressure, to my surprise it tested at 950. This should be useful information for anyone that wants a high output tank for their Hammer 7 like myself. Just thought I would share.
|Azreal ||03-24-2013 04:02 AM |
They vary quite a bit FYI I have seen as low as 700 and as high as 1000
|All times are GMT -4. The time now is 09:36 AM. || |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC