|Ask The Experts You ask the tough questions|
| ||Thread Tools||Search this Thread|
|01-08-2013, 06:50 PM||#1 (permalink)|
matrix lcd board
hey guys, just picked up a dye lcd matrix, and I cant seem to get a hang of the board. If you could point me towards a good manual somewhere that would be super.
If not, there are two questions I really need answered.
As soon as I turn the gun on, it says IP off in the topish left, and the eyes don't function. None of the buttons turn them on (already checked, they're plugged into the board, and installed into the body).
Secondly, when I try and actually change a setting in the programming mode, it wont let me do anything, what looks like a locked padlock flashes in the top corner. Am I doing something wrong, or is there a tourney lock I just cant find?
|01-08-2013, 07:12 PM||#2 (permalink)|
Join Date: May 2007
Location: South Jersey
the tourney lock might be on the actual board, so you would have to remove the grips to access it.
otherwise, i would say to check out the Matrix section on PBN. there you should find the board and how to program it.
you can also find bonesjackson, he is an authority with older than Dye Matrix-es.
Brand New Furious Harnesses for ICD electros
Best place for all things ICD
|01-08-2013, 09:17 PM||#3 (permalink)|
Join Date: Jan 2011
Location: Hanford, CA
The tourny lock is on! You will have to remove the grips and push the little button.
Go to PBN under the Dye Fourm is the Vintage Matrix fourm we all hang out there. Or you can go to PBlegion and see the Vintage Matrix stuff it will answer any questions you have is read the whole thing.
|Thread Tools||Search this Thread|