Toying with the idea of the due dam.
Are their any issues with it or any quick fixes i need to know about?
Well the integrated reg threads together in-line with the bolt and back cap, so a possible issue is that in theorey your reg could unscrew and dump high pressure air into the body of your gun.
Having played around with one for the last few days, we have found some good and some bad
-Mags are cheap and a decent design.
-Grip and foregrip are nice to hold.
-Ergonomics are good.
-Well thought out drop stock.
-Good tool kit/Spares. They are incorporated into a dummy mag.
-The mag well is a separate piece, and looks to be usable in other designs.
-If you try to lock down the follower in the mag and you do not fill it completely, it will crush paint when inserted into the marker.
-If you do not insert the mag in one action, it will eject paint into the mag well and the second attempt to seat the mag will crush said paint.
-We had issues with the marker breaking paint using both hopper and mags.
-Switching between hopper and mag was not as easy as we had wished.
-Very difficult to clean. It requires an almost complete teardown to clean a magazine/breech break. :(
-If you do not tighten the two piece barrel together, before inserting it into the marker, you may have trouble getting the back out of the marker without removing the shroud.
-The sight brightness is lacking, even in full sunlight.
I am sure I can find a few more for either column, but not right now.
|All times are GMT -4. The time now is 02:48 AM.|
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC