Oring/parts kit for empire mini, sniper; tippy TiPX, and spyder hammer 7?
Was wondering what orings and parts I should kicking around in my toolbox for these markers?
I have for lube/greese techt gunsav (pink tub) an a barely used 2oz bottle of sl33k, buy more lube or not? I will probably get an ansgear starter kit with hater sauce too.
Instead of more grease get some oil as well. As for the O-rings, look online at the manuals or parts diagrams to find out which orings these markers use. You may be able to add a few more orings from oring monkey or somewhere else to the starter kit to have all the ones you need.
look at manuals, find out the correct sizes, then support a fellow MCB'er HERE! :)
Can't for the life of me find those sizes. But other than the o rings what else should I get other than Allen keys?
An o-ring pick is handy as well as an adjustable wrench, strap wrench. I've also got a screwdriver set in there too.
Also avoid the hater sauce....your gun will thank you later.
This was posted on PBN for the mini, might not be 100% but should get you started:
Rear Bolt Guide x3: -017 Bn70
Inside Diameter: 11/16
Outside Diameter: 13/16
Rear Back Cap: 12x2mm Bn70
Solenoid Top: 2.5 x 1.5mm
Solenoid Middle: 7.5 x 1mm
Air Transfer Tube x2 "top/bottom": 12.16mmx0.89mm or 12x.8mm
Bottom Air Tube/Red: 4.72 x 1.88mm Bn70
Poppit O-ring/Clear: 10.54 x 1.88mm Polyurethane 90
Lol I just found the oring monkey sizing chart. I guess I will buy some parts kits and buy a large amount of most used oring.
|All times are GMT -4. The time now is 06:30 PM.|
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC