Oring/parts kit for empire mini, sniper; tippy TiPX, and spyder hammer 7?

hth · 01-27-2013, 09:53 AM

Was wondering what orings and parts I should kicking around in my toolbox for these markers?

I have for lube/greese techt gunsav (pink tub) an a barely used 2oz bottle of sl33k, buy more lube or not? I will probably get an ansgear starter kit with hater sauce too.

redlaser666 · 01-27-2013, 11:05 AM

Instead of more grease get some oil as well. As for the O-rings, look online at the manuals or parts diagrams to find out which orings these markers use. You may be able to add a few more orings from oring monkey or somewhere else to the starter kit to have all the ones you need.

Floundah · 01-27-2013, 01:02 PM

look at manuals, find out the correct sizes, then support a fellow MCB'er HERE!

hth · 01-27-2013, 03:32 PM

Can't for the life of me find those sizes. But other than the o rings what else should I get other than Allen keys?

Dr. VonDeafingson · 01-27-2013, 03:45 PM

An o-ring pick is handy as well as an adjustable wrench, strap wrench. I've also got a screwdriver set in there too.

Also avoid the hater sauce....your gun will thank you later.

redlaser666 · 01-27-2013, 04:57 PM

This was posted on PBN for the mini, might not be 100% but should get you started:

Rear Bolt Guide x3: -017 Bn70
Inside Diameter: 11/16
Outside Diameter: 13/16

Rear Back Cap: 12x2mm Bn70

Solenoid Top: 2.5 x 1.5mm

Solenoid Middle: 7.5 x 1mm

Air Transfer Tube x2 "top/bottom": 12.16mmx0.89mm or 12x.8mm

Bottom Air Tube/Red: 4.72 x 1.88mm Bn70

Poppit O-ring/Clear: 10.54 x 1.88mm Polyurethane 90

hth · 01-28-2013, 08:43 PM

Lol I just found the oring monkey sizing chart. I guess I will buy some parts kits and buy a large amount of most used oring.

01-27-2013, 09:53 AM	#1 (permalink)
hth Active Member Join Date: Dec 2011	Oring/parts kit for empire mini, sniper; tippy TiPX, and spyder hammer 7? Was wondering what orings and parts I should kicking around in my toolbox for these markers? I have for lube/greese techt gunsav (pink tub) an a barely used 2oz bottle of sl33k, buy more lube or not? I will probably get an ansgear starter kit with hater sauce too.

01-27-2013, 11:05 AM	#2 (permalink)
redlaser666 US ARMY SIG CORPS Join Date: Dec 2010 Location: Spanaway, Washington	Instead of more grease get some oil as well. As for the O-rings, look online at the manuals or parts diagrams to find out which orings these markers use. You may be able to add a few more orings from oring monkey or somewhere else to the starter kit to have all the ones you need. __________________ My Feedback!

01-27-2013, 04:57 PM	#6 (permalink)
redlaser666 US ARMY SIG CORPS Join Date: Dec 2010 Location: Spanaway, Washington	This was posted on PBN for the mini, might not be 100% but should get you started: Rear Bolt Guide x3: -017 Bn70 Inside Diameter: 11/16 Outside Diameter: 13/16 Rear Back Cap: 12x2mm Bn70 Solenoid Top: 2.5 x 1.5mm Solenoid Middle: 7.5 x 1mm Air Transfer Tube x2 "top/bottom": 12.16mmx0.89mm or 12x.8mm Bottom Air Tube/Red: 4.72 x 1.88mm Bn70 Poppit O-ring/Clear: 10.54 x 1.88mm Polyurethane 90 __________________ My Feedback!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

01-27-2013, 03:32 PM	#4 (permalink)
hth Active Member Join Date: Dec 2011	Can't for the life of me find those sizes. But other than the o rings what else should I get other than Allen keys?

01-28-2013, 08:43 PM	#7 (permalink)
hth Active Member Join Date: Dec 2011	Lol I just found the oring monkey sizing chart. I guess I will buy some parts kits and buy a large amount of most used oring.