|Ask The Experts You ask the tough questions|
| ||Thread Tools||Search this Thread|
|02-03-2013, 07:47 PM||#1 (permalink)|
Need help ID'ing an old brass cocker barrel
Any idea who made this? It's nickel plated brass, has a single row of spiral porting, and scallop milling at the tip. The rear of the barrel, where it threads into the marker body has an aluminum section press-fit onto the outside of the barrel body. The cocker threads are cut into this sleeve.
It came of off an older tricked out mini cocker with almost every upgrade you could get prior to 2000.
Pics of the barrel:
Could it be a PPS barrel?
Here's a pic of the mini-cocker:
|02-03-2013, 08:00 PM||#2 (permalink)|
J and j on the barrel.
RIP - Ed "BigDaddy" Roth and "Indian" Larry
Wild Geese - Coney Isand White Fish - ECA
What Serial Number Is Your Cocker? WTB
ECAP - "Making players dreams other players nightmares"
|02-03-2013, 08:00 PM||#3 (permalink)|
Join Date: Sep 2006
Location: Houston, Tejas
I want to say that may be an early J&J barrel. I have a stainless J&J and it uses the same thread sleeve.
Edit: D'oh, BOS wins.
Wouldn't you really rather have a Buick?
|02-04-2013, 10:39 PM||#5 (permalink)|
I am stuck on bandaid...
Join Date: Apr 2006
Location: Orlando, FL
Oooh buddy, that is one slick looking minicocker!
My guess would be j&j as well. They did some pretty oddball stuff back in the day. I was always under the impression that they'd make you whatever you wanted if you custom ordered from them.
...'cause bandaid's stuck on me!
|Thread Tools||Search this Thread|