mcarterbrown.com  

Ask The Experts You ask the tough questions

Reply
 
Thread Tools Search this Thread
Old 02-04-2013, 08:09 AM   #1 (permalink)
Red
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
Shocktech Replacement Seals - Where to Find?

I need:

1) Bomb o-rings - I would like the old red/pink replacements.

2) Rat 3:16 Seals two flat silicone seals, one shaft o-Ring, Valve Body O-ring

3) Seals for the Ram.

4) Seals for the LPR.



Any information, sizes, anything will help.


TF
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline   Reply With Quote
Old 02-04-2013, 01:26 PM   #2 (permalink)
I like Guns and Cigars.
 
maggot's Avatar
 
Join Date: Jul 2008
Location: MO

Last I heard ST is still answering the phone, you might try just giving them a call.
__________________


Otter Customs Paintball - - - - Straight Up Cigars - - - - My Feedback
maggot is online now   Reply With Quote
Old 02-08-2013, 05:36 PM   #3 (permalink)
Merc
 
JOESPUD27's Avatar
 
Join Date: Apr 2006
Location: St. Louis Area
Send a message via AIM to JOESPUD27

CCM Fan
Did you ever find what you needed TF? I'm in the same boat and wondering if a call to ST is in order or a waste of time.

Jay
__________________
Feedback

Best Field in STL
JOESPUD27 is offline   Reply With Quote
Old 02-08-2013, 05:41 PM   #4 (permalink)
MaD
MCB Member
 
MaD's Avatar
 
Join Date: Oct 2007
Location: A2, Michigan

Definitely call them. While some folks have fudged in replacements, no one has ever found a source for the tiny red 3-way orings. Last couple times I've needed them, Shocktech came through.
__________________
-= MaD =-
Sheridan Seals, Valve Tools, and Parts
Feedback
DIY Paintball Stuff!

Note: While I would love to take credit for his work, I am not associated with Mad Customs!
You can contact BigMatt-MadCustoms in his MCB forum
MaD is offline   Reply With Quote
Old 02-08-2013, 05:50 PM   #5 (permalink)
Merc
 
JOESPUD27's Avatar
 
Join Date: Apr 2006
Location: St. Louis Area
Send a message via AIM to JOESPUD27

CCM Fan
Will do, hopefully they have LPR and Ram seals as well.

SHOCKTECHUSA.COM

Think they still do a $29.99 time and tune up ?

Jay
__________________
Feedback

Best Field in STL
JOESPUD27 is offline   Reply With Quote
Old 02-09-2013, 06:07 PM   #6 (permalink)
WVU paintball #19
 
minimag03's Avatar
 
Join Date: Aug 2006
Location: Morgantown, WV

AKA Fan
Shocktech is the only place I know to get the pink bomb orings and plastic seals for their valves. I think I saw the valve seals for sale on eBay in 2 packs not long ago from Shocktech. Although you could probably also use the seals from a ANS GenX autococker valves, they look to be the exact same. You also don't have to use one against the lug nut. I think they just o that some the pretty aluminum won't get scratched.

Ram and LPR use standard size orings. I don't know the exact ones, but you probably have them if you have an oring kit. The LPR also uses a Shrader valve from a car tire. You need a few of those and a tool to remove/install them.
minimag03 is offline   Reply With Quote
Old 02-10-2013, 11:24 AM   #7 (permalink)
Merc
 
JOESPUD27's Avatar
 
Join Date: Apr 2006
Location: St. Louis Area
Send a message via AIM to JOESPUD27

CCM Fan
The LPR never leaked, and the ram leak was fixed by a leaky barb. I still need to call Shocktech (Monday) and get 3-way seals. I was just going to redo all the seals at once, if possible, to avoid other leaks springing up down the road.

Surprised TF has chimed in and said either "I got all the seals and replaced them like a boss" or "Holy #$@% that was a PITA to do"

Jay
__________________
Feedback

Best Field in STL
JOESPUD27 is offline   Reply With Quote
Old 02-10-2013, 11:59 AM   #8 (permalink)
WVU paintball #19
 
minimag03's Avatar
 
Join Date: Aug 2006
Location: Morgantown, WV

AKA Fan
Quote:
Originally Posted by JOESPUD27 View Post
The LPR never leaked, and the ram leak was fixed by a leaky barb. I still need to call Shocktech (Monday) and get 3-way seals. I was just going to redo all the seals at once, if possible, to avoid other leaks springing up down the road.

Surprised TF has chimed in and said either "I got all the seals and replaced them like a boss" or "Holy #$@% that was a PITA to do"

Jay
Shocktech will try to tell you that you have to order one of their shrader valves to work in the FGP, but that's not true. I've been using a car tire shrader valve from autozone for years now.
minimag03 is offline   Reply With Quote
Old 02-22-2013, 03:12 PM   #9 (permalink)
Merc
 
JOESPUD27's Avatar
 
Join Date: Apr 2006
Location: St. Louis Area
Send a message via AIM to JOESPUD27

CCM Fan
After contacting Shocktech, i got an email reply that they do not have Bomb 3-way o-rings or o-rings for their Autococker ram.

Jay
__________________
Feedback

Best Field in STL
JOESPUD27 is offline   Reply With Quote
Old 03-30-2013, 11:49 PM   #10 (permalink)
Red
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
Update on this one.

Ram -o-rings were easy enough. A N70-010 (If I remember right) on the front - and a eurethane o-ring on the shaft itself (used as a bumper). I simply took one from a crossfire fill nipple plug.

Need to work on the bomb o-rings. I see that Oring Monkey sells them - but they look like Buna. Hmmm....


TF
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » Ask The Experts

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 10:01 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC