mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Ask The Experts (http://www.mcarterbrown.com/forums/ask-experts/)
-   -   What sheridan is this (http://www.mcarterbrown.com/forums/ask-experts/229229-what-sheridan.html)

Dougefreshe 03-19-2013 11:24 PM

What sheridan is this
 
Alright looked thru vintagerex. (hope i didnt miss it.)
Any and all info would be appreciated.

Just picked it up in a trade.
As usual traded a perfectly working gun for one that isnt. :bang::bang:

http://i1245.photobucket.com/albums/...ps2b8f5509.jpg
http://i1245.photobucket.com/albums/...ps21f94088.jpg

Brassballs 03-19-2013 11:53 PM

Edit: it's a PMI 1 direct feed.
http://www.vintagerex.com/gallery/PM...dan/PMI-I.html

what's the barrel length?

how about posting some better/closer pictures of it.
what's wrong with it?

Dougefreshe 03-20-2013 01:08 AM

Barrel is 14in
Dont know if anything is wrong with it,other than extremely dirty.
No co2 at the house to check.

http://i1245.photobucket.com/albums/...ps59c208a1.jpg

Brassballs 03-20-2013 01:36 AM

looks like a good one to me.

are you missing the parts not shown in the pictures?

Dougefreshe 03-20-2013 01:50 AM

As far as i can tell,its complete.
Have any idea what the trigger bar is for.
It is cleaning up better than i thought.
Now i have to get the valve tool.
And thx

Brassballs 03-20-2013 01:55 AM

I don't see the back cap in the pictures,you should get it drilled or a new one so you have a rear velocity adjuster.
you have the spring and hammer too?
http://i52.photobucket.com/albums/g2...psfbb68a7c.jpg


that's a auto trigger set up/aka slam fire.you might need to tune/time it a little.
it should fire when the bolt just closes all the way.

here's a good cheap way of making a valve tool
http://www.mcarterbrown.com/forums/s...alve-tool.html

disassembly
http://www.mcarterbrown.com/forums/s...sassembly.html


you can run that gun on 12 gram co2's instead of the CA set up...
BTW there's a sheridan section in the armory



.

Dougefreshe 03-20-2013 02:41 AM

Ya i have all that. And saw the diy tool,think i have one to try on.
Read the non cart sticky. Gonna need to read it a few more times
B4 i tear it apart.

Then again i ordered stuff from bacci for my vm 68 and found a new cup seal for my raptor. Ordered a clippard noid for the supernova et. And a couple other friggin guns spread out thru my cave that need attention.
Have at least 10 guns in my crack box.
So might be a while. Lol

Chachi 03-21-2013 10:58 AM

with the 14in barrel, could that be a P-12? I could be wrong, but I think the only difference between the PMI-1DF and hte P-12 is the barrel length.

nice find

sniper42 03-21-2013 02:02 PM

No that is not a P-12. It is much too short so it is definitely a PMI-DF.

snaparen 03-21-2013 09:09 PM

I think he is getting the 14" from measuring the after market muzzle break on the end.


All times are GMT -4. The time now is 12:31 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC