Need some a/c knowledge
Never done it, so I thought I should ask first.
Can someone tell me how to remove the feedneck from a pre-2k a/c.
Appreciate any help here..
Thanks in advance -- walz
Does it need to go back in?
Not sure but customer wants springfeed made tight to marker.
Would I/he be able to reinstall a feedneck after if he wanted.
(not necessary the original one). And can another be had if needed?
They are a pain to get back in and aligned right once out...they are fish mouthed to the inside of the bolt tube.
If it need to go back... collet and collet block an some heat.
If it doesn't matter vice grip and mallet.
Very cool - Thanks a lot BOS.
Will a heat gun do the job?
And by the way - sorry for destroying and selling you off in the Keep, sell, destroy thread. Your still one of my hero's man...
Hair Dryer, most likely not
Its some nasty epoxy not loctite. Heat is more to get the feed neck to expand and crack it. A heat gun should do.... but I never intend to have them go back in once there out.
OK- heat er up to "crack" the epoxy and cool the feedneck down with ice.
Yep - That make sense. Hot body, cooler feedneck. expansion and contraction does the job.
Thanks guys - really appreciate the help.
|All times are GMT -4. The time now is 11:19 AM.|
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC