mcarterbrown.com  

Ask The Experts You ask the tough questions

Reply
 
Thread Tools Search this Thread
Old 10-12-2007, 03:15 PM   #1 (permalink)
Stock Class Aficionado
 
idkfa's Avatar
 
Join Date: Mar 2007
Location: Vancouver, BC, Canada

CCM Fan
Buzzard Questions

I had some quick Buzzard questions. I just got one, and I am a little confused.

1. How do you change the velocity?

2. How do you remove the bucket changer adapter? There is no hex like on a CCI changer.

3. Is it normal for a Buzzard to have a hair trigger?

I tried to look for better FAQs, but just never found good answers. Thanks.

EDIT: Is there anyway to safely bend a T-stock without damaging the anno? The angle is way too straight for me.
__________________
idkfa is offline   Reply With Quote
Old 10-12-2007, 03:34 PM   #2 (permalink)
Exterminate!
 
WilD's Avatar
 
Join Date: Mar 2006
Location: The Motor City
Send a message via AIM to WilD

Brass N Wood Fan
Palmers Fan
RTP Fan
1. Down the barrel. There should be an adjuster in the bolt alters spring tension.
2. Something grippy, strap wrench perhaps?
3. I don't think so. Neither of my Comps had what I would describe as a "hair" trigger.
4. Doubt it
WilD is offline   Reply With Quote
Old 10-12-2007, 04:21 PM   #3 (permalink)
Stock Class Aficionado
 
idkfa's Avatar
 
Join Date: Mar 2007
Location: Vancouver, BC, Canada

CCM Fan
Thanks! I don't have the proper adjuster, so I may just have to take my time and chrono it by taking it apart a few times to get it set.

The trigger was actually so responsive, the pump stroke forward would set it off, even when my trigger finger was nowhere near. I took it apart and reassembled it, and it seems to have fixed itself... I love Nelsons.
__________________
idkfa is offline   Reply With Quote
Old 10-12-2007, 04:38 PM   #4 (permalink)
DCB
Post Whore
 
DCB's Avatar
 
Join Date: Apr 2006
Send a message via AIM to DCB

The best Q&A you will find.
Carter Buzzard Q&A please sticky this - PbNation

The trigger problem is that the body (snub) and valve are not in "perfect" alignment. There is a set way that you "have" to tighten all the screws... see the Q&A.
The bucket changer can be a bugger to get off... you just need something to get a good grip on it with.
It takes a special velocity adjusting rod down the barrel. The face of the bolt has 4 holes in it and the tool had 2 fingers on it so it fits into 2 of the holes and you turn it clockwise for more FPS.

Peace
__________________
DCB<><
CPPA #1092
Pump Gun Pimp #80
LPPC #164
Spec Ops Pump User#86
Pump Player Clan
http://www.techpb.com/forum/index.php?showtopic=54098
Feedback
http://www.mcarterbrown.com/forums/f...html#post78710
Gallery
http://www.mcarterbrown.com/gallery/...er=184&cat=500
DCB is offline   Reply With Quote
Old 10-13-2007, 02:32 AM   #5 (permalink)
MCB Member
 
freedom's Avatar
 
Join Date: Apr 2006
Location: jerzzeeee shore!

go get yourself a good strap wrench.
if you use something else and scratch the bucket changer, you'll wish you spent the cash for a strap wrench...
freedom is offline   Reply With Quote
Old 10-13-2007, 07:23 AM   #6 (permalink)
Stock Class Aficionado
 
idkfa's Avatar
 
Join Date: Mar 2007
Location: Vancouver, BC, Canada

CCM Fan
Thanks everyone!

One last question though. How tight is the barrel supposed to be? I have heard they are made to very tight tolerances, but the barrel is actually hard to thread... Ideas?

EDIT: I am asking all of these questions because I got this in a trade, and before I ship my marker back to the person, I want to be sure that it is functioning properly. It shoots well, VERY well, but there are some things I need to figure out.
__________________

Last edited by idkfa; 10-13-2007 at 07:31 AM.
idkfa is offline   Reply With Quote
Old 10-13-2007, 08:56 AM   #7 (permalink)
Red - Black
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
They are often tight- but if you loosen the bracket that holds the Stock Class feed - the barrels often are much easier to remove. The two screws on the bottom with tweak the snubb body slightly.

TF
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline   Reply With Quote
Old 10-13-2007, 09:17 AM   #8 (permalink)
Stock Class Aficionado
 
idkfa's Avatar
 
Join Date: Mar 2007
Location: Vancouver, BC, Canada

CCM Fan
Quote:
Originally Posted by Talfuchre View Post
They are often tight- but if you loosen the bracket that holds the Stock Class feed - the barrels often are much easier to remove. The two screws on the bottom with tweak the snubb body slightly.

TF


I just discovered that, and was rushing back to revoke the question. Thanks for the reply, it is good to have a second opinion.

Now I just need to play with the trigger set screw. The touchiness is back, and the gun goes off when I return the pump arm. I am hoping if I screw this out a little, it will stop.

EDIT: I just took apart the trigger frame... It seems there is not set screw in the trigger itself... What exactly does this mean? I am starting to get second thoughts on this trade, as the marker is not quite in working order.
__________________

Last edited by idkfa; 10-13-2007 at 09:23 AM.
idkfa is offline   Reply With Quote
Old 10-13-2007, 09:44 AM   #9 (permalink)
Stock Class Aficionado
 
idkfa's Avatar
 
Join Date: Mar 2007
Location: Vancouver, BC, Canada

CCM Fan
It looks like not everyone keeps the markers in top condition like I do. A good cleaning along with a new Nelson spring (blue) and it seems to be working perfect.

Thanks for the help!
__________________
idkfa is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » Ask The Experts

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 12:13 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC