|Ask The Experts You ask the tough questions|
| ||Thread Tools||Search this Thread|
|09-30-2013, 10:15 AM||#1 (permalink)|
A Very Manly Muppet
What would be the best way to deal with roll-outs and double feeds on my Carter Buzzard? I've been considering getting Wedgits installed, but I'd like to see what other options are available/recommended. I should also add that its a Stainless Steel barrel.
Hopefully some Carter owners can chime in with solutions too
|10-01-2013, 01:15 AM||#3 (permalink)|
Join Date: Sep 2008
Location: Huntington Beach, CA
Have carter bore it for his insert style or send it off to get freak bored. Or nail polish since it's cheap.
|10-01-2013, 04:58 PM||#4 (permalink)|
A small piece of electrical tape in the barrel works like polish. It wears off and need to be replaced, but its cheap, easy, and effective, especially when even the smallest bore barrels are too big and there aren't other options.
|10-01-2013, 11:08 PM||#5 (permalink)|
Join Date: Jul 2009
Location: Beaver Falls PA (outside Pittsburgh)
I have been dealing with this issue over on pbn one of the guys came up with a good idea. get a barrel adapter and then I can bore the adapter from the front until there is a small lip remaining on the adapter and then take the adapted barrel and bore it out in such a way that it mates up with the insert properly. Then that barrel would only work with that gun but its a trade off you would have to make to get the inserts to work correctly.
My Feedback - http://www.mcarterbrown.com/forums/f...ml#post1575817
I also freak bore
A wise man once said:
"The gap between theory and reality is not as far in theory as it is in reality."
|Thread Tools||Search this Thread|