|Ask The Experts You ask the tough questions|
| ||Thread Tools||Search this Thread|
|10-07-2013, 09:45 PM||#1 (permalink)|
(sort of a) Newbie
Join Date: Nov 2012
Location: St. Louis
I just picked up a PMI trracer clone and was testing it out in my backyard when I heard a problem. There is a small leak in the internals but thats not the biggest issue. I cant get the velocity up high enough to break on anything from a decent distance. I opened up the gun and didn't see any visible issues. I thought maybe the springs need to be swapped out. What do you guys think?
|10-07-2013, 10:13 PM||#2 (permalink)|
Join Date: Aug 2012
What are you using for power HPA or Co2? If its HPA is it a low presure tank that may be your problem. The leak is most likely your cup seal. But for $5 I'd call up Mike at CCI and replace both springs (main & valve springs) then try it again.
|10-08-2013, 01:04 PM||#4 (permalink)|
Join Date: Jun 2009
Location: victorville ,Cali
Clean. oil and test.Make sure you remove all the o-rings and wipe em down good, them some oil...Leaking = volocity issues.. Then spring to taste if needed..Then you can deal with the roll out issues with a lil nail polish..
WTF,why would i trade for that?
Ebay, camocow200 (1001) + 100% positive
MCB 275 +
tedaut,Would this count as a socal stock gun ? Oh wait never mind , it would need a stick feed and auto trigger.
|Thread Tools||Search this Thread|