Would like a couple of KPs appraised. - Page 2

c6quad · 08-19-2006, 07:30 PM

Quote:

Originally Posted by pwpaintball

No the side feed has been removed. I'm not sure if the hole was enlarged so balls would feed from a PVC elbow that the guy had on it. Thank You

i can tell by just looking at your pic that the feed hole has been enlarged.

on a factory kp-2 the top of the feed port is at about the 2 o'clock position. i'm looking down the barrel and the front bead is at 12 o'clock for reference.

chad

incynr8 · 08-20-2006, 06:47 AM

neither are kp3s, which generally had a shorter lower tube, and alos had usually, the chunky post lawsuit pull style tubular safety block. Not that it matters much.'

I figure all kps with wood are worth 300+, as PPS charges 250 extra to scratch build, and you have to have a stock and trigger for that as well..
They may or may not need to rebarrel at +75$ cost as well. That all depends and I am no judge from here.

pwpaintball · 08-20-2006, 11:11 AM

Thank you all for the input. This helped.

Paul

08-20-2006, 06:47 AM	#12 (permalink)
incynr8 Purify with flame Join Date: Apr 2006 Location: On some dinky hill	neither are kp3s, which generally had a shorter lower tube, and alos had usually, the chunky post lawsuit pull style tubular safety block. Not that it matters much.' I figure all kps with wood are worth 300+, as PPS charges 250 extra to scratch build, and you have to have a stock and trigger for that as well.. They may or may not need to rebarrel at +75$ cost as well. That all depends and I am no judge from here. __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search