Removing Rainmaker feedneck ???

HellsGate139 · 01-02-2008, 07:40 PM

Whats the best way?

I want to get it out without damaging it, and id like to put it back in after i do some milling so what would be the best glue to use?

HellsGate139 · 01-03-2008, 07:21 PM

Anyone ???

El Gringo · 01-03-2008, 07:22 PM

Hacksaw

Clearush · 01-08-2008, 01:04 PM

^ what he said

but seriously, if your gonna mill it in the first place just cut off the feed neck and mill the top to take a tabbed spyder feed neck or something and you can get a nice clamping feed neck.

Rainman229 · 01-08-2008, 03:11 PM

Quote:

Originally Posted by HellsGate139

Whats the best way?

I want to get it out without damaging it, and id like to put it back in after i do some milling so what would be the best glue to use?

What you need to do is lathe up a peice of stock to fit in the feed neck Or find something that fits. Then clamp it in a vise with soft jaws. (don't use the rubber ones, use aluim soft jaws) tighten it up as much as possible. Install a barrel. Next take a propane torch and heat the body up at the feed neck. When you think you have it hot enough lightly pulll and tug on the barrel till it brakes free. once it's loose wiggle it off.

To put it back on you'll need to epoxy it.

HellsGate139 · 01-08-2008, 05:50 PM

Thanks guys

But i did it this last weekend

I heated it with a propane torch then droped it in some ice water and used a strap wrench to twist it till it came free. It worked well and came off nice and clean

What kind of epoxy is the best to use for this?

01-02-2008, 07:40 PM	#1 (permalink)
HellsGate139 MCB Member Join Date: Mar 2007	Removing Rainmaker feedneck ??? Whats the best way? I want to get it out without damaging it, and id like to put it back in after i do some milling so what would be the best glue to use? __________________ OPUS DIABOLI

01-03-2008, 07:21 PM	#2 (permalink)
HellsGate139 MCB Member Join Date: Mar 2007	Anyone ??? __________________ OPUS DIABOLI

01-03-2008, 07:22 PM	#3 (permalink)
El Gringo Post Whore Join Date: Apr 2006	Hacksaw __________________ ..... Have a Grateful Day! EL Gringo's Feedback Buy my Black Phoon

01-08-2008, 01:04 PM	#4 (permalink)
Clearush MCB Member Join Date: Mar 2006 Location: HTown, TX	^ what he said but seriously, if your gonna mill it in the first place just cut off the feed neck and mill the top to take a tabbed spyder feed neck or something and you can get a nice clamping feed neck. __________________ Carter's Commando Texas division Black Watch Scenario Paintball Team My SCP Feedback Ebay Feedback MCB Feedback

01-08-2008, 05:50 PM	#6 (permalink)
HellsGate139 MCB Member Join Date: Mar 2007	Thanks guys But i did it this last weekend I heated it with a propane torch then droped it in some ice water and used a strap wrench to twist it till it came free. It worked well and came off nice and clean What kind of epoxy is the best to use for this? __________________ OPUS DIABOLI

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search