Do angel barrels fit sterling?

Mindless_Chaos · 01-25-2008, 04:25 PM

like the title says, do angel barrels fit sterling?

Phantom Power · 01-25-2008, 04:53 PM

No. Early Sterlings had their own thread, and the latter ones take Spyder barrels.

WilD · 01-25-2008, 04:54 PM

I don't think so. I've certainly never heard that, but I have heard Raptor barrels are similar to Sterling, and can be used if some basic machining is done.

Mindless_Chaos · 01-25-2008, 04:58 PM

So finding a barrel to fit a sterling is not going to be easy. BAH.

WilD · 01-25-2008, 05:00 PM

Quote:

Originally Posted by Mindless_Chaos

So finding a barrel to fit a sterling is not going to be easy. BAH.

Not if it's an old Sterling. The new production guns are spyder threaded as was mentioned. Sterling barrels do turn up here and on ebay once in a while.

Mindless_Chaos · 01-25-2008, 05:02 PM

I figure its an older one because it has no setscrew for the feed neck.

WilD · 01-25-2008, 05:04 PM

Quote:

Originally Posted by Mindless_Chaos

I figure its an older one because it has no setscrew for the feed neck.

It is centerfeed? In that case, it is worth checking to see if it is Spyder threaded.

Mindless_Chaos · 01-25-2008, 05:05 PM

WilD · 01-25-2008, 05:08 PM

Well, it is an older one then. By the way, J&J still had Edge kits in Sterling threads listed on their website as recently as two years ago (the last time I checked). It shouldn't be that hard to track down a barrel. I'd post a WTB add here and watch the for sale section and ebay, people have them and they do turn up.

Jesterbuilt · 01-25-2008, 05:30 PM

You have to lathe down a raptor barrel just a scosh. Barrels are not that hard to find but you will have to look. Hit up Jicay, I'm sure he has a spare laying around..... I'll sell you a 12 Smart Parts, if you want to buy the whole marker along with it?

01-25-2008, 04:25 PM	#1 (permalink)
Mindless_Chaos Active Member Join Date: Dec 2007 Location: JeRsEy Posts: 172	Do angel barrels fit sterling? like the title says, do angel barrels fit sterling? __________________ MARKER's 02 Red Blackmagic Autococker. ANS Gen-X-2 Reg. Eblade E1 Frame w/ ZeroB 2.4. ANS Jackhammer 2. Delrin Bolt & pin. Ans Mini ram w/ ANS QEV's. Derin Back block. Turtle Titanium Pump Rod. Evil Front block. MTX MQ2 Valve. CP flame drop forward. Smartparts FREAK JR barrel system. CP ASA. Pic of the machine WGP Sniper. ANS High flow valve. ANS quick pull bolt. DYE 20" boom stick. KAPP Drop Zone Drop forward. WGP SF frame. ANS Hammer kit. ANS Gen-X-2 Reg. Pic of the Sniper. My Feedback

01-25-2008, 04:53 PM	#2 (permalink)
Phantom Power Pump Gun Dealer Join Date: Mar 2006 Location: Pender Island, BC Posts: 1,905	No. Early Sterlings had their own thread, and the latter ones take Spyder barrels. __________________

01-25-2008, 04:54 PM	#3 (permalink)
WilD the MilD MOD Join Date: Mar 2006 Location: The Motor City Posts: 2,567	I don't think so. I've certainly never heard that, but I have heard Raptor barrels are similar to Sterling, and can be used if some basic machining is done. __________________ PGPOG #79 POG #1055

01-25-2008, 04:58 PM	#4 (permalink)
Mindless_Chaos Active Member Join Date: Dec 2007 Location: JeRsEy Posts: 172	So finding a barrel to fit a sterling is not going to be easy. BAH. __________________ MARKER's 02 Red Blackmagic Autococker. ANS Gen-X-2 Reg. Eblade E1 Frame w/ ZeroB 2.4. ANS Jackhammer 2. Delrin Bolt & pin. Ans Mini ram w/ ANS QEV's. Derin Back block. Turtle Titanium Pump Rod. Evil Front block. MTX MQ2 Valve. CP flame drop forward. Smartparts FREAK JR barrel system. CP ASA. Pic of the machine WGP Sniper. ANS High flow valve. ANS quick pull bolt. DYE 20" boom stick. KAPP Drop Zone Drop forward. WGP SF frame. ANS Hammer kit. ANS Gen-X-2 Reg. Pic of the Sniper. My Feedback

01-25-2008, 05:02 PM	#6 (permalink)
Mindless_Chaos Active Member Join Date: Dec 2007 Location: JeRsEy Posts: 172	I figure its an older one because it has no setscrew for the feed neck. __________________ MARKER's 02 Red Blackmagic Autococker. ANS Gen-X-2 Reg. Eblade E1 Frame w/ ZeroB 2.4. ANS Jackhammer 2. Delrin Bolt & pin. Ans Mini ram w/ ANS QEV's. Derin Back block. Turtle Titanium Pump Rod. Evil Front block. MTX MQ2 Valve. CP flame drop forward. Smartparts FREAK JR barrel system. CP ASA. Pic of the machine WGP Sniper. ANS High flow valve. ANS quick pull bolt. DYE 20" boom stick. KAPP Drop Zone Drop forward. WGP SF frame. ANS Hammer kit. ANS Gen-X-2 Reg. Pic of the Sniper. My Feedback

01-25-2008, 05:05 PM	#8 (permalink)
Mindless_Chaos Active Member Join Date: Dec 2007 Location: JeRsEy Posts: 172	RF __________________ MARKER's 02 Red Blackmagic Autococker. ANS Gen-X-2 Reg. Eblade E1 Frame w/ ZeroB 2.4. ANS Jackhammer 2. Delrin Bolt & pin. Ans Mini ram w/ ANS QEV's. Derin Back block. Turtle Titanium Pump Rod. Evil Front block. MTX MQ2 Valve. CP flame drop forward. Smartparts FREAK JR barrel system. CP ASA. Pic of the machine WGP Sniper. ANS High flow valve. ANS quick pull bolt. DYE 20" boom stick. KAPP Drop Zone Drop forward. WGP SF frame. ANS Hammer kit. ANS Gen-X-2 Reg. Pic of the Sniper. My Feedback

01-25-2008, 05:08 PM	#9 (permalink)
WilD the MilD MOD Join Date: Mar 2006 Location: The Motor City Posts: 2,567	Well, it is an older one then. By the way, J&J still had Edge kits in Sterling threads listed on their website as recently as two years ago (the last time I checked). It shouldn't be that hard to track down a barrel. I'd post a WTB add here and watch the for sale section and ebay, people have them and they do turn up. __________________ PGPOG #79 POG #1055

01-25-2008, 05:30 PM	#10 (permalink)
Jesterbuilt WGP whore Join Date: Mar 2006 Location: Everett, WA. Posts: 921	You have to lathe down a raptor barrel just a scosh. Barrels are not that hard to find but you will have to look. Hit up Jicay, I'm sure he has a spare laying around..... I'll sell you a 12 Smart Parts, if you want to buy the whole marker along with it? __________________ Boy, the next words out of your mouth better be some brilliant Mark Twain S**t. Cuz it's definately gettin chisled on your tombstone. Had it been a blind body and not blue I would of jumped on it like an eithiopian on a steak dinner. My Ex-Wife is ungrateful She Never Used the Wedding present I bought her......A COFFIN http://www.myspace.com/baconfiend http://www.mcarterbrown.com/forums/f...ht=jesterbuilt

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search