|Ask The Experts You ask the tough questions|
| ||Thread Tools||Search this Thread|
|08-30-2006, 03:59 PM||#1 (permalink)|
Ok so I bought a warp feed for my mag and hooked it up and it works... sort of. The warp feed seems to only run while I am pressing the on button and when I take my finger off the on button the motor stops even if I fire the marker this seems wrong to me.
|08-30-2006, 04:11 PM||#2 (permalink)|
I had the same problem with a NIB Warp Feed I bought from someone. Here is the explanation I was given:
The button is a pre-load type function, and cycles to load up the ball stack in the hose. The bracket that you mount to the bottom of the grip frame, the one that holds the warp out to the side, is a 'vibration' sensor that will activate the warp every time you fire. I found that I didn't have the time to play around with it, and sold mine a while back. Good luck with yours!
** Spin Doctor's Paintball Page
** MCB Feedback
** PBN Feedback
** PBN Feedback (old)
Agglet re: Frink: "Much like a newborn baby your collection is both beautiful and disgusting."
russc: "PBN is a business, and that's why they prefer thousands of morons to hundreds of intelligent posters"
drum: "Between the ammo shipments and all the long rectangular packages, not to mention regular mail from the Pa. Superior Court, my mailman is pretty sure that I am a freak."
|08-30-2006, 04:46 PM||#3 (permalink)|
If you open up the warp there is a sensitivity setting that you may have to turn up. Here's the manual: http://www.airgun.com/downloads/WarpInstructions.pdf
|Thread Tools||Search this Thread|