sights,scopes,optics, what do you use? - Page 2

badkarma · 09-06-2006, 10:09 PM

No I haven't, are they available on brownells?

sniperfan · 09-07-2006, 02:16 AM

Pretty sure they are... also another cool sight thats cheap is the Williams WGRS receiver sight. No click detents, but you still get the Ghost Ring effect, and its cheaper than most other receiver sights.

You guys should check out some gunsmithing forums like the 1911 Forum, or even better, "Louder than Words". The level of perfection that a name gunsmith is able to squeeze out a project these days is staggering. It makes what most of us paintballers accept as 'custom' look kinda rough. I post over there as "Slopemeno" from time to time.

Shiba-Kun · 09-07-2006, 02:50 AM

Quote:

Originally Posted by sniperfan

You can still get Millet sights and parts. "Brownells" (www.brownells.com) has all sorts of stuff.

Have you ever seen the Scattergun Technologies Ghost Ring Sights? THOSE are some baaaad sights. They're made for the Remington 870 and 1100/11-87, but could easliy be set up on a PB gun.

Werd.

Except my Carter Comp is a fixed one piece barrel. So the Sun Spot was easily removed w/o any tools during the times I had to break down my gun. (I have to remove the sight to be able to slip off the pump and under cocker rod.)

Yeah, I know... I'm lazy *sigh*.

I'll just need to figure out the threading dia. for the hole and order a new sight. No biggie I guess.

badkarma · 09-07-2006, 03:06 AM

Cool. Thanks for info gang. Please continue to post what use, I pictures of the more unusual ones would be great.

sniperfan · 09-07-2006, 05:16 AM

Lots of gunsmithing stuff is 6-48 threads for sights/scopes. Brownells has the taps.

Millett uses a dual crimp setup for some of their front sights, so you'll usually see two closely spaced holes without threading.

Millett has their own website that has a pretty good catalog of everything they've ever made as I recall.

doc Zox · 09-07-2006, 05:28 AM

the faux aimpoints are pretty spiffy:

http://www.1337tactical.com/pro-show...=1&column_id=7

Shmavistime · 09-07-2006, 09:05 AM

Im putting a ladder sight on my Kp2 as soon as i send it off to BretG.

Chappy · 09-07-2006, 09:28 AM

I use a scope mount ring. Simple, cheap, and its not gonna break. Works great for me.

09-07-2006, 05:16 AM	#15 (permalink)
sniperfan Active Member Join Date: Jul 2006 Location: Usually at my desk.	Lots of gunsmithing stuff is 6-48 threads for sights/scopes. Brownells has the taps. Millett uses a dual crimp setup for some of their front sights, so you'll usually see two closely spaced holes without threading. Millett has their own website that has a pretty good catalog of everything they've ever made as I recall. Last edited by sniperfan; 09-07-2006 at 08:38 PM.

09-07-2006, 09:05 AM	#17 (permalink)
Shmavistime Active Member Join Date: Jul 2006	Im putting a ladder sight on my Kp2 as soon as i send it off to BretG. __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

09-07-2006, 02:16 AM	#12 (permalink)
sniperfan Active Member Join Date: Jul 2006 Location: Usually at my desk.	Pretty sure they are... also another cool sight thats cheap is the Williams WGRS receiver sight. No click detents, but you still get the Ghost Ring effect, and its cheaper than most other receiver sights. You guys should check out some gunsmithing forums like the 1911 Forum, or even better, "Louder than Words". The level of perfection that a name gunsmith is able to squeeze out a project these days is staggering. It makes what most of us paintballers accept as 'custom' look kinda rough. I post over there as "Slopemeno" from time to time.

09-07-2006, 05:28 AM	#16 (permalink)
doc Zox Shop Smart,Shop S-Mart Join Date: Jul 2006	the faux aimpoints are pretty spiffy: http://www.1337tactical.com/pro-show...=1&column_id=7