Need an ID of a gun

noelydeeznutz · 03-17-2008, 03:11 PM

Specs that i KNOW for sure.

WGP
Composite/plastic frame
right feed
threaded for 2k+
bolt/backblock are THREADED together (no pins)

it had a pump kit on it when i got it, but im not sure if it was originally a sniper or if it was converted.

Pics:

Trigger frame
Bolt
threading
venturi
Back Block 1 2
Hammer Lug adjuster (not sure if this was done AFTER or if its stock)
Front Block Threading 1 2 (2nd pic is a flash, trying to get a pic of the threads, showing that they dont look to be cut aftermarket)
Serial Number
Body shot (trigger frame is from a Psychoballistics lightning cocker)

P4p3Rc1iP · 03-17-2008, 03:18 PM

Definetly need pics!

Rayodder · 03-17-2008, 03:28 PM

Quote:

Originally Posted by noelydeeznutz

Specs that i KNOW for sure.

WGP
Composite/plastic frame
right feed
threaded for 2k+
bolt/backblock are THREADED together (no pins)

WGP - so it could be a lot of things from WGP family
Composite/plastic frame - so it is after 97 model, but it is just as easy for someone to change it.
right feed - prior to 2003
threaded for 2K+ - not sure you are referring to, I am going to assume it is the front block you are talking about.
bolt/backblock are THREADED together (no pins) - obviously it is an aftermarket item.

so far it sounds like a parts box cocker based on a 2000-2002 RF body.

Schmitti · 03-17-2008, 03:31 PM

Is it a mini body or a full sized body? if it is a mini, has it been cut (no anno on front of body) ? If this is the case the body may have been a pre 2k that was cut short and was then re-tapped for a 2k banjo (front block) bolt.

The screw together back block/bolt is an early design (as in original) that was either tossed on a 2k body or the original body that was chopped (see above)

E

noelydeeznutz · 03-17-2008, 03:35 PM

pics are up

spymongoose · 03-17-2008, 03:41 PM

I recognize the bolt and back block as being made by some guy... Cole I think was his last name. Everything else looks like 00-02 wgp blahzeh crud. I saw a back block and bolt like that go on ebay a while back, thats the only reason I have any clue.

The back block and bolt are a nice find, and that cocker while not terribly "special" will make for an awesome shooter. Good luck!

noelydeeznutz · 03-17-2008, 03:43 PM

the bolt/backblock combo and composite frame... and the front block threaded for 2k+ has me stumped...

ive NEVER seen the bolt/backblock combo before, so i figured it was older, the frame i know is older, but than you throw the front block threading into the mix and it messes it all up...

spymongoose · 03-17-2008, 03:47 PM

its all post 2k, you definitely have an 00-02 full legnth right feed cocker body. Remember that "standard" (non 45) frames were stock in 00 and 01. The "curvy" milling on either side makes it factory WGP. thats a nice looking 45 on there, hard to make out exactly what it is.

noelydeeznutz · 03-17-2008, 03:48 PM

the frame on there in the body pic is from a psychoballistics lightning autococker (that i made my main pump)

Rayodder · 03-17-2008, 03:54 PM

that is definitely a parts box sniper, the mismatch anno' between the ASA and the body and IIRC 2k+ models were sold with composite 45 frames not the AGD/WGP frame.

03-17-2008, 03:11 PM	#1 (permalink)
noelydeeznutz MCB Member Join Date: Mar 2008	Need an ID of a gun Specs that i KNOW for sure. WGP Composite/plastic frame right feed threaded for 2k+ bolt/backblock are THREADED together (no pins) it had a pump kit on it when i got it, but im not sure if it was originally a sniper or if it was converted. Pics: Trigger frame Bolt threading venturi Back Block 1 2 Hammer Lug adjuster (not sure if this was done AFTER or if its stock) Front Block Threading 1 2 (2nd pic is a flash, trying to get a pic of the threads, showing that they dont look to be cut aftermarket) Serial Number Body shot (trigger frame is from a Psychoballistics lightning cocker) __________________ AbsolutePaintball.net ball till you fall SplatterEffectPaintball the ONLY place to shop PM me for feedback links Last edited by noelydeeznutz; 03-17-2008 at 03:37 PM..

03-17-2008, 03:18 PM	#2 (permalink)
P4p3Rc1iP Active Member Join Date: Aug 2006 Location: Leeuwarden, The Netherlands	Definetly need pics! __________________

03-17-2008, 03:31 PM	#4 (permalink)
Schmitti Red=Moderator Join Date: Apr 2006 Location: Schen. NY	Is it a mini body or a full sized body? if it is a mini, has it been cut (no anno on front of body) ? If this is the case the body may have been a pre 2k that was cut short and was then re-tapped for a 2k banjo (front block) bolt. The screw together back block/bolt is an early design (as in original) that was either tossed on a 2k body or the original body that was chopped (see above) E __________________ Gone fishing

03-17-2008, 03:35 PM	#5 (permalink)
noelydeeznutz MCB Member Join Date: Mar 2008	pics are up __________________ AbsolutePaintball.net ball till you fall SplatterEffectPaintball the ONLY place to shop PM me for feedback links

03-17-2008, 03:41 PM	#6 (permalink)
spymongoose It AGG to be a Furry Join Date: Apr 2007 Location: Vegas Baby!	I recognize the bolt and back block as being made by some guy... Cole I think was his last name. Everything else looks like 00-02 wgp blahzeh crud. I saw a back block and bolt like that go on ebay a while back, thats the only reason I have any clue. The back block and bolt are a nice find, and that cocker while not terribly "special" will make for an awesome shooter. Good luck! __________________ My Feedback My Gallery 05/08/09

03-17-2008, 03:43 PM	#7 (permalink)
noelydeeznutz MCB Member Join Date: Mar 2008	the bolt/backblock combo and composite frame... and the front block threaded for 2k+ has me stumped... ive NEVER seen the bolt/backblock combo before, so i figured it was older, the frame i know is older, but than you throw the front block threading into the mix and it messes it all up... __________________ AbsolutePaintball.net ball till you fall SplatterEffectPaintball the ONLY place to shop PM me for feedback links

03-17-2008, 03:47 PM	#8 (permalink)
spymongoose It AGG to be a Furry Join Date: Apr 2007 Location: Vegas Baby!	its all post 2k, you definitely have an 00-02 full legnth right feed cocker body. Remember that "standard" (non 45) frames were stock in 00 and 01. The "curvy" milling on either side makes it factory WGP. thats a nice looking 45 on there, hard to make out exactly what it is. __________________ My Feedback My Gallery 05/08/09

03-17-2008, 03:48 PM	#9 (permalink)
noelydeeznutz MCB Member Join Date: Mar 2008	the frame on there in the body pic is from a psychoballistics lightning autococker (that i made my main pump) __________________ AbsolutePaintball.net ball till you fall SplatterEffectPaintball the ONLY place to shop PM me for feedback links

03-17-2008, 03:54 PM	#10 (permalink)
Rayodder MCB Member Join Date: Apr 2006 Location: Richmond, British Columbia	that is definitely a parts box sniper, the mismatch anno' between the ASA and the body and IIRC 2k+ models were sold with composite 45 frames not the AGD/WGP frame. __________________ $$$ trumps dibs every single time!!! MCB Feedback

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search