Automag RT feedneck fitting problem

Tanongi · 03-23-2008, 09:56 PM

Recently I picked up an Automag RT Pro and am having problems finding a good fitting feedneck since the neck has been slightly cut down. Does anyone have any suggestions on what I can do, I'll post some pictures down below for reference.

So far I have tried:

1st Attempt - Spider Clamping Elbow

Result - It fits at first but as you move around it starts to "loosen" and move around, eventually falling off.

2nd Attempt - Spider Clamping Elbow w/ tape wrapped around neck

Result - Fits, but same as before, it starts to loosen then fall off, the tape gets worn out nearly instantly and the hopper falls off.

Damage - Elbows teeth destroyed.

3rd Attempt - Brass Eagle Pocket Hopper Elbow

Results - lol, too big

My current attempts have been futile, I'm lusting to use this thing without the Revvy flying back and hitting me in the face while I'm running.

Damage - Scratched neck and teeth on elbow have been badly damaged

Tanongi · 03-24-2008, 12:35 AM

Sat around again for a while, finally got the thing working, just needed to fix the screws on the Spyder Elbow because they wouldn't loosen enough to clamp onto the tape.

Sorry for posting about an unnecasary problem, although I will think about an offer someone just gave me. :3

Please delete this thread.

03-23-2008, 09:56 PM	#1 (permalink)
Tanongi Active Member Join Date: Feb 2008 Location: BC, Canada	Automag RT feedneck fitting problem Recently I picked up an Automag RT Pro and am having problems finding a good fitting feedneck since the neck has been slightly cut down. Does anyone have any suggestions on what I can do, I'll post some pictures down below for reference. So far I have tried: 1st Attempt - Spider Clamping Elbow Result - It fits at first but as you move around it starts to "loosen" and move around, eventually falling off. 2nd Attempt - Spider Clamping Elbow w/ tape wrapped around neck Result - Fits, but same as before, it starts to loosen then fall off, the tape gets worn out nearly instantly and the hopper falls off. Damage - Elbows teeth destroyed. 3rd Attempt - Brass Eagle Pocket Hopper Elbow Results - lol, too big My current attempts have been futile, I'm lusting to use this thing without the Revvy flying back and hitting me in the face while I'm running. Damage - Scratched neck and teeth on elbow have been badly damaged

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

03-24-2008, 12:35 AM	#2 (permalink)
Tanongi Active Member Join Date: Feb 2008 Location: BC, Canada	Sat around again for a while, finally got the thing working, just needed to fix the screws on the Spyder Elbow because they wouldn't loosen enough to clamp onto the tape. Sorry for posting about an unnecasary problem, although I will think about an offer someone just gave me. :3 Please delete this thread.