will this fit a PGP?

SN toter · 09-11-2006, 08:52 AM

I was looking for a cool stock for my PGP and I found this from crossman, any idea if this might fit?

crosman stock

Crash · 09-11-2006, 09:57 AM

It will fit with some modification.

Lenny · 09-11-2006, 12:07 PM

What kind of modification? I've been looking for something like this forever.

SN toter · 09-11-2006, 12:27 PM

Quote:

Originally Posted by Lenny

What kind of modification? I've been looking for something like this forever.

ditto! I accidentally stumbled across a crossman airgun with it and thought to check their website to see if they sold them individually. I'm ordering one this week so when I get it I'll let you know what needs to be done.

Rayodder · 09-11-2006, 12:32 PM

The area just under the back frame screw or where the web of your finnger need to have a slot cut, because the frame geometry is slightly different. a plate need to added in the frame, because the screw hole for the stock is much lower than the ones on the PGP frame.

SN toter · 09-11-2006, 12:35 PM

Quote:

Originally Posted by Rayodder

The area just under the back frame screw or where the web of your finnger need to have a slot cut, because the frame geometry is slightly different. a plate need to added in the frame, because the screw hole for the stock is much lower than the ones on the PGP frame.

couldn't you just create a new hole on the stock that would line up with the one in the grip frame?

Lenny · 09-11-2006, 12:49 PM

How well would it fit on a PMI 1 or P68SC? That's what I wanted to put it on.

SN toter · 09-11-2006, 12:53 PM

I'd imagine the same, aren't sheridan pumps gripframes interchangeable?

Rayodder · 09-11-2006, 12:54 PM

Quote:

Originally Posted by SN toter

couldn't you just create a new hole on the stock that would line up with the one in the grip frame?

yes, but be careful how you drill it, the position is less than 1/4 of an inch, it is really easy to break the separation between the new hole and the hole and end up with a huge slot.

Quote:

Originally Posted by Lenny

How well would it fit on a PMI 1 or P68SC? That's what I wanted to put it on.

They all uses the same frame.

SN toter · 09-11-2006, 01:04 PM

sweet, thanks ray! I'm going to probably just create an adapter plate

09-11-2006, 08:52 AM	#1 (permalink)
SN toter Post Whore Join Date: May 2006 Location: Ambridge, PA	will this fit a PGP? I was looking for a cool stock for my PGP and I found this from crossman, any idea if this might fit? crosman stock __________________ My Feedback

09-11-2006, 09:57 AM	#2 (permalink)
Crash Post Whore Join Date: Mar 2006 Location: North East Texas	It will fit with some modification. __________________ Later, John My FS Listing Misc bits- My feed back: http://www.mcarterbrown.com/forums/s...ead.php?t=1021 Carter's Commando Texas Division: http://www.mcarterbrown.com/forums/c...-division.html

09-11-2006, 12:53 PM	#8 (permalink)
SN toter Post Whore Join Date: May 2006 Location: Ambridge, PA	I'd imagine the same, aren't sheridan pumps gripframes interchangeable? __________________ My Feedback

09-11-2006, 01:04 PM	#10 (permalink)
SN toter Post Whore Join Date: May 2006 Location: Ambridge, PA	sweet, thanks ray! I'm going to probably just create an adapter plate __________________ My Feedback

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

09-11-2006, 12:32 PM	#5 (permalink)
Rayodder I have a Phantom Join Date: Apr 2006 Location: Richmond, British Columbia	The area just under the back frame screw or where the web of your finnger need to have a slot cut, because the frame geometry is slightly different. a plate need to added in the frame, because the screw hole for the stock is much lower than the ones on the PGP frame.