|
             |
 |
|
| Ask The Experts You ask the tough questions |
 |
| | LinkBack | Thread Tools | Search this Thread |
03-30-2008, 02:14 PM
| #1 (permalink) |
| Newbie Join Date: Mar 2008 Location: Longview, Texas | Needing some info for a project-- Hi folks - I'm working on a project and I need some information: The PCS USP pistol accepts Evil Pipe tips (I called PCS and asked). That being said, here are the questions I need answered: 1) What is the threading on the evil pipe tips (presumably also, that would be the threading on the end of the USP covered by the plastic protector piece). I need actual tap/die thread/pitch specs. 2) What is the threading on the end of the Hammerhead Bang Stik barrel? I need the actual tap/die thread/pitch specs here too. 3) Is there anyone out there that can make custom adapters? What I'm looking for would be an adapter to go on the USP and then fit the cone (reverse-ported) Bank Stik tip. The adapter would need to match the actual ID of the CS USP pistol bore, but only need to be about 1 inch long, just enough to screw on the USP and have enough threads for the Bang Stik tip. Can anyone help me or point me to the right direction? Thanks !! --TAG-- |
|  |
|
03-30-2008, 09:26 PM
| #2 (permalink) |
| MCB Member  Join Date: Mar 2006 Location: Texas | Humm, this the same Tag from Black Watch??
__________________ Later, John MY Want To Buy: Black 45 slider frame with internals Cheap 2k pump kit My feed back: http://www.mcarterbrown.com/forums/s...ead.php?t=1021 Carter's Commando Texas Division: http://www.mcarterbrown.com/forums/c...-division.html |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
