|
             |
 |
|
| Ask The Experts You ask the tough questions |
 |
| | LinkBack | Thread Tools | Search this Thread |
04-02-2008, 09:35 PM
| #1 (permalink) | |
| Village Idiot  Join Date: Jul 2006 Location: Barre VT    | Double Checking something I just want to be sure on something. If I put a reg on my 1k blazer and run it off a bottom line tank the only thing I should have to adjust it the velocity and the reg it's self right?
__________________ feedback http://www.mcarterbrown.com/forums/f...-feedback.html Quote:
| |
|  |
|
04-02-2008, 09:43 PM
| #2 (permalink) | |
| Administrator  Join Date: May 2006 Location: Trenchtown | Not sure I understand the question; but I will give it a shot... Once your reg is adjusted to the correct output and has taken it's set, you will only need to adjust the velocity screw at the rear of the gun to control velocity. Assuming that your gun is functioning correctly, then the LPR (on the right side of the gun as you point it) should not need to be adjusted. Also, the LPR has no impact on velocity at all. There are instructions for adding a Stabilizer to your gun and coordinating that with the velocity, etc, over on the PPS site under their tech pages. Good luck, D
__________________ Quote:
 "Dude... you're a chick." - Cartman "The eyes are the nipples of the face." - Shelly | |
|
| |
|
04-03-2008, 07:20 AM
| #3 (permalink) | |
| Village Idiot Join Date: Jul 2006 Location: Barre VT | Yes that is exactly what I was asking thank you and I will check over there (new to this whole PPS thing and didn'teven think to check their site for the info) Again Thanks Drum
__________________ feedback http://www.mcarterbrown.com/forums/f...-feedback.html Quote:
| |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
