What should i do?

autococker_child99 · 06-13-2008, 10:08 AM

I do not only own autococker's, but i also own a tippmann A-5. It is one of my favorite guns that i have ever shot, But i honestly need a new barrel. I have been haveing a lot of truble when i aim because i have the car stock. And because i have it, and when i am playing and also have my mask on, i cannot look down the sight. because my mask gets in the way of me doing it. Right now my mask is some sort of j.t., I like it because i got a new lense for it when i bought it and i have worn in perfectly

. So should i cahnge my mask or my stock? I know that a dogleg would solve this, but i do not have half that much to spend right now. There was a alternate option that i had found on youtube. Here is the link, YouTube - Borg-Tech: Pimp your Tippmann: stock Type 2(A5/X7)

I was wondering if it would be possible to do this with a dog leg stock. But i don't know. So i am asking. Can Anybody help me?

RealtorTommy · 06-13-2008, 10:20 AM

I bought a used metal dogleg at a low price......

RatFink · 06-13-2008, 10:26 AM

Yeah, do that and then smash up your entertainment system with it. Personally I have always preferred the factory tank position. I know it's not "mil sim", but form follows function in my book.

Chemical-X · 06-13-2008, 11:52 AM

what about a raised sight rail? If this is out of the question then also consider going remote with a gas through stock. Still if that is not an option go back to the tank as a stock. Its better to sight than it is to spray.

sdawg · 06-13-2008, 01:08 PM

Get a flex mask or get rid of the stock and use the bottle as the stock.

autococker_child99 · 06-13-2008, 07:11 PM

I have tryed using a flex mask, but dosn't help. And i didn't even think of raising the sight rail, I might try it, thanx.

autococker_child99 · 06-13-2008, 07:16 PM

The other thing that i am afraid of is that if i make the dogleg from wood, it will be not only be complicated to make, but also afraid it will just break because i will make it to thin. And i do not have any type of metal to do it with. I don't even have the stock but plate any more.

CamoDeafie · 06-13-2008, 07:26 PM

T stock it. Paintball Product | Paintball Guns | Gun Stocks and Blocks and Paintball Gun Packages cheaper, and if youre adventurous, can make a wood block to go onto it for shape

Phantom Power · 06-13-2008, 07:49 PM

Get rid of the stock and just use a tank on the bottomline.

autococker_child99 · 06-14-2008, 01:16 AM

camodeafie, i thnk you just solved all my problems, thanks though to every body for your advise.

06-13-2008, 10:08 AM	#1 (permalink)
autococker_child99 Seasoned Member Join Date: Jun 2008	What should i do? I do not only own autococker's, but i also own a tippmann A-5. It is one of my favorite guns that i have ever shot, But i honestly need a new barrel. I have been haveing a lot of truble when i aim because i have the car stock. And because i have it, and when i am playing and also have my mask on, i cannot look down the sight. because my mask gets in the way of me doing it. Right now my mask is some sort of j.t., I like it because i got a new lense for it when i bought it and i have worn in perfectly. So should i cahnge my mask or my stock? I know that a dogleg would solve this, but i do not have half that much to spend right now. There was a alternate option that i had found on youtube. Here is the link, YouTube - Borg-Tech: Pimp your Tippmann: stock Type 2(A5/X7) I was wondering if it would be possible to do this with a dog leg stock. But i don't know. So i am asking. Can Anybody help me? __________________ RESPECT THE MAG My Sale thread - My feed back - Another sale - WANTED- a dirt cheap on/off, Ibanez sr500, and maybe some mag parts. Ion- A gross misuse of Taiwan plastic, along with Chinese labor only to find out you have the guaranteed "top of the line" Japanese quality.

06-13-2008, 10:20 AM	#2 (permalink)
RealtorTommy Team On Target Join Date: Sep 2007 Location: Central Florida	I bought a used metal dogleg at a low price...... __________________ Tommy "Realtor" Long Team On Target Sponsorship/Promotions Team On Target sponsored by www.teamontargetpb.com www.smartparts.com www.techtpaintball.com www.flurryindustries.com www.customhomedivision.com www.scenariodreams.com Cannibalistic Paintball, On Target Army and Navy, Blackrain Paintball Grenades, BallBreakers Paintball

06-13-2008, 10:26 AM	#3 (permalink)
RatFink Active Member Join Date: Jan 2008 Location: So-Cal	Yeah, do that and then smash up your entertainment system with it. Personally I have always preferred the factory tank position. I know it's not "mil sim", but form follows function in my book. __________________ I am the thread killer, one post and it's anchors away! Rec-ballin' for fun since day one Feedback:http://www.mcarterbrown.com/forums/f...-feedback.html

06-13-2008, 01:08 PM	#5 (permalink)
sdawg MCB Member Join Date: Dec 2006 Location: Texas	Get a flex mask or get rid of the stock and use the bottle as the stock. __________________ Everybody: Let's ease up on the red loctite, 'kay? Thanks. Feedback

06-13-2008, 07:11 PM	#6 (permalink)
autococker_child99 Seasoned Member Join Date: Jun 2008	I have tryed using a flex mask, but dosn't help. And i didn't even think of raising the sight rail, I might try it, thanx. __________________ RESPECT THE MAG My Sale thread - My feed back - Another sale - WANTED- a dirt cheap on/off, Ibanez sr500, and maybe some mag parts. Ion- A gross misuse of Taiwan plastic, along with Chinese labor only to find out you have the guaranteed "top of the line" Japanese quality.

06-13-2008, 07:16 PM	#7 (permalink)
autococker_child99 Seasoned Member Join Date: Jun 2008	The other thing that i am afraid of is that if i make the dogleg from wood, it will be not only be complicated to make, but also afraid it will just break because i will make it to thin. And i do not have any type of metal to do it with. I don't even have the stock but plate any more. __________________ RESPECT THE MAG My Sale thread - My feed back - Another sale - WANTED- a dirt cheap on/off, Ibanez sr500, and maybe some mag parts. Ion- A gross misuse of Taiwan plastic, along with Chinese labor only to find out you have the guaranteed "top of the line" Japanese quality.

06-13-2008, 07:26 PM	#8 (permalink)
CamoDeafie Post Whore Join Date: Feb 2007 Location: Monmouth, Oregon	T stock it. Paintball Product \| Paintball Guns \| Gun Stocks and Blocks and Paintball Gun Packages cheaper, and if youre adventurous, can make a wood block to go onto it for shape __________________ nothing like the heft of steel nelspots

06-13-2008, 07:49 PM	#9 (permalink)
Phantom Power Pump Gun Dealer Join Date: Mar 2006 Location: Pender Island, BC	Get rid of the stock and just use a tank on the bottomline. __________________

06-14-2008, 01:16 AM	#10 (permalink)
autococker_child99 Seasoned Member Join Date: Jun 2008	camodeafie, i thnk you just solved all my problems, thanks though to every body for your advise. __________________ RESPECT THE MAG My Sale thread - My feed back - Another sale - WANTED- a dirt cheap on/off, Ibanez sr500, and maybe some mag parts. Ion- A gross misuse of Taiwan plastic, along with Chinese labor only to find out you have the guaranteed "top of the line" Japanese quality.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search