Paintball

[BIG-AL]

I might get a unibody Phantom and was wondering if there's a way to adjust the velocity without the velocity rod. Thank you in advance!

[Brinstar]

You can take out the valve body, bolt, and hammer and adjust the bolt with an allen wrench/flat head screwdriver.

[BIG-AL]

I guess I could do that, but it would be really annoying...

[idkfa]

Those are your options, take apart, or velocity rod.

[Clearush]

if you have a harbor frieght or something like it near by think about picking up a really long screw driver and wrap a few wraps of duct or electrical tape around it to protect the barrel. may be cheaper or may cost the same as ordering a velocity rod.


or meditate alot and try moving it with your mind....

[Listessa]

Originally Posted by Clearush

if you have a harbor frieght or something like it near by think about picking up a really long screw driver and wrap a few wraps of duct or electrical tape around it to protect the barrel. may be cheaper or may cost the same as ordering a velocity rod.


or meditate alot and try moving it with your mind....

That was the same train of thought I had, Clearush.

I've just never had any luck with that mind trick.

[Azzy]

or pull the barrel off and use a normal screwdriver....

[foster]

Pulling it off is the easy part, putting it back on...now that is the trick

[HP_Lovecraft]

Love those hacksaws! I'll help

[Clearush]

Originally Posted by Listessa

That was the same train of thought I had, Clearush.

I've just never had any luck with that mind trick.

me either which is why I went with the really long screwdriver in the end




oh oh cut the barrel off and thread for autococker threads but then you'd be trashing a unibody.