Going market prices for the following guns:

StJimmy666 · 07-03-2008, 02:39 AM

Nexus DC1 Cocker w/ ZeroB

Stock Nexus DC2

DC Milled Viking

Thanks in advance.

himurax13 · 07-03-2008, 02:46 AM

I have no clue about cockers, never had much use for them. As far as Vikings go, the price can vary wildly depending on what milling you had done, what kind of anno job you had done, what accessories you are including, and the rarity and desirability of the particular setup. In short, it can go anywhere from $600 to $1300.

Contour · 07-03-2008, 02:56 AM

dc1 is probably 800 sh
dc2 is probably 900ish my prices may be a little high, not sure.

arpie · 07-03-2008, 08:33 AM

Pictures, lets see what they look like. A poster above is correct that with options prices may vary (from what I have seen) anywhere from $400-$1500.

Good luck,

Arpie

blackmagic71 · 07-03-2008, 01:18 PM

Quote:

Originally Posted by Contour

dc1 is probably 800 sh
dc2 is probably 900ish my prices may be a little high, not sure.

I'd say lower on the DC1 maybe $500-$650ish

Contour · 07-03-2008, 02:09 PM

Well the only difference between the dc1 and 2 is the eblade kit so with the zero b it's practically the same gun.

Heebs · 07-05-2008, 07:24 AM

Quote:

Originally Posted by Contour

Well the only difference between the dc1 and 2 is the eblade kit so with the zero b it's practically the same gun.

Different milling as well.

The DC1 is worth about 400 bucks and the DC 2 is worth about 900 bucks.

Contour · 07-05-2008, 02:01 PM

dc1's and dc2's have the same milling I believe.

yannotti · 07-05-2008, 03:51 PM

no they are very similar but different the way their rails are milled is different for one thing

Cunha · 07-05-2008, 08:56 PM

DC milled vikings typically go for 800 dollars for a standard non FSP without extra milling. That is usually their asking price. There has been one up for around that much for a week or two.

07-03-2008, 02:56 AM	#3 (permalink)
Contour Active Member Join Date: Jun 2007 Posts: 271	dc1 is probably 800 sh dc2 is probably 900ish my prices may be a little high, not sure. __________________ PB4L Industries Vertebrae, hybrid rival, orracle, 2 2k3 snipers and a phantom F/S/T! Tons of cocker parts, slider, pneumatics, internals, tons of stuff!!

07-03-2008, 02:09 PM	#6 (permalink)
Contour Active Member Join Date: Jun 2007 Posts: 271	Well the only difference between the dc1 and 2 is the eblade kit so with the zero b it's practically the same gun. __________________ PB4L Industries Vertebrae, hybrid rival, orracle, 2 2k3 snipers and a phantom F/S/T! Tons of cocker parts, slider, pneumatics, internals, tons of stuff!!

07-05-2008, 02:01 PM	#8 (permalink)
Contour Active Member Join Date: Jun 2007 Posts: 271	dc1's and dc2's have the same milling I believe. __________________ PB4L Industries Vertebrae, hybrid rival, orracle, 2 2k3 snipers and a phantom F/S/T! Tons of cocker parts, slider, pneumatics, internals, tons of stuff!!

07-05-2008, 03:51 PM	#9 (permalink)
yannotti Upstate NY Join Date: Oct 2006 Posts: 63	no they are very similar but different the way their rails are milled is different for one thing __________________ www.route4paintball.com

07-05-2008, 08:56 PM	#10 (permalink)
Cunha MCB Member Join Date: Apr 2006 Location: Monterey, CA Posts: 4,212	DC milled vikings typically go for 800 dollars for a standard non FSP without extra milling. That is usually their asking price. There has been one up for around that much for a week or two. __________________ If you're not moving, there is no movement. Some small things for sale.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search