Paintball

[SilentDeath12886]

I have a Nelson clone marker.

It has a trracer body and ACi maverick frame.

I have 2 primary problems with this marker. The marker was purchased in non working conidtion for the record and was put together with various parts from other guns.

Problem 1:
When I try to cock the marker, the bolt will not catch onto the hammer.

Problem 2:
After manually cocking the marker by shoving something down the breech, The trigger frame will not release the sear and hammer. Upon inspection, the trigger, when full depressed, doesn't even touch the sear. The sear is of a longer style. I am thinking I need the short version.

What are some solutions? I am thinking its just the wrong hammer and sear. Bolt is in decent condition.

Ill get pictures later tonight of the internals.

[MaD]

For #1, normally they wont latch unless it's gassed up.

for #2, that's hard to say. Pics of the internals (and how they're assembled) / grip frame would be of great help on that one.

[SilentDeath12886]

I jsut tried gassing it up, and no improvement there.

It seems that the hammer doesnt stay forward enough for it to catch on.

I also jsut found the cupseal is leaking. Will phantom powertubes and cupseals work on this?

[russc]

If it has a velocity adjustable bolt, unscrew the adjuster (from the front down the barrel) counter-clockwise.

[edit] nevermind - mismatched parts are obviously what's going on here...

[SilentDeath12886]

But for the record, its the none adjustable.

[SilentDeath12886]

Where can I get spare trracer/maverick parts?

[Clearush]

You can use spyder cupseals

It won't latch if it's not fully gassed up

check the sear on the hammer see if it has been ground down I got one like that before wouldn't fire half the time.

does it have a stubby power tube or the long nelson style power tube??

[SilentDeath12886]

Its the stubby powertube. I am sure the hammer is not designed for the trracer/maverick. The sear doesnt even touch the trigger with or without the trigger depressed. After looking at pictures I see the difference too. The sear is elongated and points far towards the back.

I did try it gassed up. My guess is that its the incorrect hammer and sear.

[Clearush]

the hammers with integrated power tubes are fairly common to find. Try posting for it in the WTB section.

[Clearush]

Tagroland has what you need plus some extras

I don't want to look at this anymore sale!