Paintball

[incynr8]

Originally Posted by Walker

What is this worth, sale value. I have enough electros, and will be selling this one.

http://home.comcast.net/~lucastl/sale/a80.jpg

WarMachine Assault-80
- Cocker threaded barrels
- Drop, on/off, S/S hose and QD.

When I got this one it needed some work:

- Replace LPR Orings
- Replace Front Block Orings
- Replace Upper Body/Spool Orings
- Replace Lower Spool Orings
- Repair broken trigger wires
- Repair bare solenoid wires
- Replace spool and housing
- Remove, dismantle, free up ball detent
- Screws frozen, had to slot them to remove.
- Added the drop, hose, and QD.

It powers up, holds air, and shoots fine across the chrono in the garage.

The ball detent was frozen and causing continual ball breaks. I drilled out the brass plug in the end, freed it up, and have a rubber plug in the end to retain the spring and detent. I've PMed Polish Guy on PBN, to see if he might have a replacement detent.

I haven't had it on the field, only single shots across the chrono in the garage. Once I got the regs functioning properly I set the HPR at 180psi, LPR at just prior to the relief pressure, and it was shooting 425 across the chrono. I backed off the HPR until it came down under 300fps.

Thanks in advance,


Walker

I'd ebay that one, it's a fine example and I wouldn't take less than 250-300 for it or I'd keep it on the wall.

[xkpxfatassxx]

Bad picture, but try to bare with me.

-Halo B w/ Rip drive, works perfectly but the on/off should b replaced (still works), shocktech rip drive, new board (forgot which one it is), speedfeed.
-Halo backman? Works but feedneck is broken.
-Evil Omen 1.5, locking feedneck, new board, works but needs tuning
-Spyder xtra, tactical butt stock
-Scope
-Spyder drop, asa, stainless steel line
-Hater v2 lube, full but used around 5 times
-Right handed dye glove (M)
-Phantom 6" barrel (New)
-Phantom Mini Pump (New)
-Stock Spyder Barrel
-All American Spyder barrel
-Asa threaded drop out changer
-Check it unimount, good condition, missing on/off knob
-Wgp reg with 90* fitting and macro
-Sight rail
-Evil Barrel (has a ding on the out side but it never effects my shots)
-Spyder parts kit (allen wrench, orings)
-Expansion chamber, has a circular scratch
-Barrel Plug


All have been used (so there are few scratches) except for those mentioned. Not perfect condition but works. Would like a group price so it's easier for you guys. Want to send it off as a group.

Thanks

Oh btw this isn't the package I was trying to mystery box for $450, that one had better things

[sturmgewehr]

got a brass eagle king cobra with stock, constant air adapter, 10 or 12 oz. skinny tank that mounts onto stock.anodizing shows wear but overall in decent condition. have had a lotta fun with this and don't really wanna sell it, but kids clothes are expensive especially when buying for 3 of them will try and post some pics, but anyinfo on this so far would be quite usefull. thanx!

[CertifiedPaintballer]

nevermind

[squee!]

Originally Posted by Tu_Padre

Constant air phantom.

10 round feed
on/off asa
12 inch dye ul
45 grips/frame
gas through foregrip
matching shoe
includes 3.5 oz. tank

Asa scratched around the macro fitting

http://i222.photobucket.com/albums/d...7/DSC00206.jpg

seen here without grips

About $180. No more than $200.

[fwag69]

My phuzzard in sig?

[Sly1]

YouTube - EGO 05 15 bps

stock ego 05..

[squee!]

Originally Posted by fwag69

My phuzzard in sig?

There's no phuzzard in your sig.

[squee!]

Originally Posted by Sly1

YouTube - EGO 05 15 bps

stock ego 05..

Realistically, no more than $300-$325 for stock (naturally depending on condition, i've senn an 05 sell for $200 but that was a prety quick sale). It may have more trade value. I think the 05 egos have bottomed out at around $300ish. I have seen some go for more, but those were pretty upp'd. The folks on the nation in the ego appraisals thread tend not to count ups, but i think most buyers do.

[fwag69]

Yeah sorry, i just edited it because it linked to the nation.