mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Ask The Experts (http://www.mcarterbrown.com/forums/ask-experts/)
-   -   Price Quote thread (http://www.mcarterbrown.com/forums/ask-experts/45654-price-quote-thread.html)

Sly1 07-17-2008 03:36 PM

Price Quote thread
 
I think its probably time to make a consolidated price quote thread so people can stop filling the fine forums of mcb with them..

So how about this,

Post your marker, or other paintball related gear, along with its condition, spec's, history if you know it, issue's, upgrades, etc... basically every detail you think might be a factor in determining the price. A picture would be a huge help also, but may not alway's be neccessary.

Thanks

Eress Pnter 07-17-2008 03:39 PM

not a bad idea.
I will sticky this now
However let's try to stay topical and keep banter to a minimum..
dammit, I might not get to post then...but oh well......

Sly1 07-17-2008 03:39 PM

Great :)

I'll go first then

What would a pirate stocked pmi direct feed with aluminum handle, polished brass (soon to be patina'd) a handmade trigger group, and an overall new finish be worth? I've made/am making everything from scratch aside from the base marker.. and was wondering what it will be worth, so far I have about 10 hours into it

the seals have a slow leak.. I would not matter in play but is annoying.

thanks

tesguy 07-20-2008 06:27 PM

*waits for the KP whores to assimilate*

A.C. Basbas 07-20-2008 07:29 PM

Lets start it cheap... I.E. no KPs.

I ran across a 14" ACI barrel which I believe was intended for a Maverick at a local store that doesn't specialize in paintball. It's unused as near as I can tell, and has a little ring that extends 1/4" out about 5 inches up the barrel from the threading. It was $0.99 so I bought it, in all good conscience can I sell it for more?

Sly1 07-20-2008 07:49 PM

of course, I'de pay probably 15$ for it, but I think someone looking for a traccer/maveric barrel would pay more.. probably like 30 max.. but I really don't know..



heres another from me, the stock ego reg off an 07.. I got offered it plus 15 for my cp shorty.. also is it any good?

Swahny 07-20-2008 11:19 PM

How much would a black Frantom II barrel be worth? I contacted someone selling one and don't know what price to expect.

phantom89 07-22-2008 07:25 PM

How much is a pmi tracer worth? Someone on my local Craigslist has 27 of them for sale. I would like to buy a few for some friends, but don't know their value. He has no set price and I was wandering what a good offer would be for 5 to 10 markers.

Walker 07-26-2008 03:42 PM

WarMachine Assault-80
 
What is this worth, sale value. I have enough electros, and will be selling this one.

http://home.comcast.net/~lucastl/sale/a80.jpg

WarMachine Assault-80
- Cocker threaded barrels
- Drop, on/off, S/S hose and QD.

When I got this one it needed some work:

- Replace LPR Orings
- Replace Front Block Orings
- Replace Upper Body/Spool Orings
- Replace Lower Spool Orings
- Repair broken trigger wires
- Repair bare solenoid wires
- Replace spool and housing
- Remove, dismantle, free up ball detent
- Screws frozen, had to slot them to remove.
- Added the drop, hose, and QD.

It powers up, holds air, and shoots fine across the chrono in the garage.

The ball detent was frozen and causing continual ball breaks. I drilled out the brass plug in the end, freed it up, and have a rubber plug in the end to retain the spring and detent. I've PMed Polish Guy on PBN, to see if he might have a replacement detent.

I haven't had it on the field, only single shots across the chrono in the garage. Once I got the regs functioning properly I set the HPR at 180psi, LPR at just prior to the relief pressure, and it was shooting 425 across the chrono. I backed off the HPR until it came down under 300fps.

Thanks in advance,


Walker

Tu_Padre 07-26-2008 04:48 PM

Constant air phantom.

10 round feed
on/off asa
12 inch dye ul
45 grips/frame
gas through foregrip
matching shoe
includes 3.5 oz. tank

Asa scratched around the macro fitting

http://i222.photobucket.com/albums/d...7/DSC00206.jpg

seen here without grips


All times are GMT -4. The time now is 11:18 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC