![]() |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() |
|
| Ask The Experts You ask the tough questions |
![]() |
| | LinkBack | Thread Tools | Search this Thread |
| | #1 (permalink) |
| Post Whore | Price Quote thread
I think its probably time to make a consolidated price quote thread so people can stop filling the fine forums of mcb with them.. So how about this, Post your marker, or other paintball related gear, along with its condition, spec's, history if you know it, issue's, upgrades, etc... basically every detail you think might be a factor in determining the price. A picture would be a huge help also, but may not alway's be neccessary. Thanks |
| | |
| | #3 (permalink) |
| Post Whore |
Great ![]() I'll go first then What would a pirate stocked pmi direct feed with aluminum handle, polished brass (soon to be patina'd) a handmade trigger group, and an overall new finish be worth? I've made/am making everything from scratch aside from the base marker.. and was wondering what it will be worth, so far I have about 10 hours into it the seals have a slow leak.. I would not matter in play but is annoying. thanks |
| | |
| | #4 (permalink) | |
| Seasoned Member |
*waits for the KP whores to assimilate*
__________________ PBN FEEDBACK 55+/0- MCB FEEDBACK 30+/0- lol Quote:
| |
| | |
| | #5 (permalink) |
| Banned Join Date: Feb 2007 Location: Amherst, Maynard, and Northampton Massachusetts. |
Lets start it cheap... I.E. no KPs. I ran across a 14" ACI barrel which I believe was intended for a Maverick at a local store that doesn't specialize in paintball. It's unused as near as I can tell, and has a little ring that extends 1/4" out about 5 inches up the barrel from the threading. It was $0.99 so I bought it, in all good conscience can I sell it for more? |
| | |
| | #6 (permalink) |
| Post Whore |
of course, I'de pay probably 15$ for it, but I think someone looking for a traccer/maveric barrel would pay more.. probably like 30 max.. but I really don't know.. heres another from me, the stock ego reg off an 07.. I got offered it plus 15 for my cp shorty.. also is it any good? |
| | |
| | #8 (permalink) |
| Active Member Join Date: Jun 2008 Location: Los Angles, CA |
How much is a pmi tracer worth? Someone on my local Craigslist has 27 of them for sale. I would like to buy a few for some friends, but don't know their value. He has no set price and I was wandering what a good offer would be for 5 to 10 markers.
|
| | |
| | #9 (permalink) |
| MCB Member Join Date: Apr 2006 Location: Spokane, WA | WarMachine Assault-80
What is this worth, sale value. I have enough electros, and will be selling this one. ![]() WarMachine Assault-80 - Cocker threaded barrels - Drop, on/off, S/S hose and QD. When I got this one it needed some work: - Replace LPR Orings - Replace Front Block Orings - Replace Upper Body/Spool Orings - Replace Lower Spool Orings - Repair broken trigger wires - Repair bare solenoid wires - Replace spool and housing - Remove, dismantle, free up ball detent - Screws frozen, had to slot them to remove. - Added the drop, hose, and QD. It powers up, holds air, and shoots fine across the chrono in the garage. The ball detent was frozen and causing continual ball breaks. I drilled out the brass plug in the end, freed it up, and have a rubber plug in the end to retain the spring and detent. I've PMed Polish Guy on PBN, to see if he might have a replacement detent. I haven't had it on the field, only single shots across the chrono in the garage. Once I got the regs functioning properly I set the HPR at 180psi, LPR at just prior to the relief pressure, and it was shooting 425 across the chrono. I backed off the HPR until it came down under 300fps. Thanks in advance, Walker
__________________ Member of the Old Farts Paintball Players Association (OFPPA) "Where You Wrap Up the Day, With Beer and Bengay!" Nelson Owner's Group |
| | |
![]() |
|
| Thread Tools | Search this Thread |
|
|