Hyper 2 Reg Fail

Cocker Master · 07-18-2008, 01:28 AM

I bought a NEW hyper2 for my VF cocker about 3 months ago, and due to not playing often enough, only got it broken in about one month ago.
Just last weekend I was working on sweet spotting it and I noticed that I can no long get the velocity to go up above 220fps. I switched regs and everything on the gun worked fine, so I know its not a problem with something else in the cocker. Anyone know what could have caused this? Has anyone else had to rebuild a hyper 2 reg this soon after getting it?

drg · 07-18-2008, 02:09 AM

No, the Hyper 2 has a similar design to CPs and Sidewinders so there should be nothing too fragile in there. Do you have some means of measuring the pressure?

Cocker Master · 07-18-2008, 11:05 AM

no gauge ports in a hyper 2, so no.

Terminator · 07-18-2008, 11:13 AM

Take it apart and clean it. It may have a bunch of thick green grease in it that Dye uses. The stuff is no good!

Cocker Master · 07-18-2008, 11:40 AM

ya, I figured that's what needed to be done, I was just wondering if anyone else had this problem so early.

drg · 07-18-2008, 03:15 PM

Quote:

Originally Posted by Cocker Master

no gauge ports in a hyper 2, so no.

Many other ways to pull pressure.

07-18-2008, 01:28 AM	#1 (permalink)
Cocker Master Banned Join Date: Feb 2008 Posts: 143	Hyper 2 Reg Fail I bought a NEW hyper2 for my VF cocker about 3 months ago, and due to not playing often enough, only got it broken in about one month ago. Just last weekend I was working on sweet spotting it and I noticed that I can no long get the velocity to go up above 220fps. I switched regs and everything on the gun worked fine, so I know its not a problem with something else in the cocker. Anyone know what could have caused this? Has anyone else had to rebuild a hyper 2 reg this soon after getting it?

07-18-2008, 02:09 AM	#2 (permalink)
drg Post Whore Join Date: Mar 2007 Posts: 1,364	No, the Hyper 2 has a similar design to CPs and Sidewinders so there should be nothing too fragile in there. Do you have some means of measuring the pressure? __________________ My feedback: PBN Old-New / AO / CC / MCB Halfcocker.com - The site for all things halfblock/midblock cocker HawaiiPB.com - Paintball forums for the state of Hawaii

07-18-2008, 11:13 AM	#4 (permalink)
Terminator Active Member Join Date: Jul 2006 Posts: 200	Take it apart and clean it. It may have a bunch of thick green grease in it that Dye uses. The stuff is no good! __________________ Phase plasma rifle in a 40 megawatt range!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

07-18-2008, 11:05 AM	#3 (permalink)
Cocker Master Banned Join Date: Feb 2008 Posts: 143	no gauge ports in a hyper 2, so no.

07-18-2008, 11:40 AM	#5 (permalink)
Cocker Master Banned Join Date: Feb 2008 Posts: 143	ya, I figured that's what needed to be done, I was just wondering if anyone else had this problem so early.