What kind of LPR is this?

mtaylor · 08-29-2008, 02:15 PM

Attached to the ASA

It's having a bit of trouble recharging fast enough to keep up with the noid, thus causing shortstroking. How much of a difference would swapping it with a tickler or a micro rock make?

BigOldSkool · 08-29-2008, 02:20 PM

Stock one off the later run super stock cockers..

Robertsr · 08-29-2008, 02:23 PM

Quote:

Originally Posted by mtaylor

How much of a difference would swapping it with a tickler or a micro rock make?

Probably a lot. Micro rock is likely the best, but I hear good things out of ticklers for pneumags too.

Cunha · 08-29-2008, 02:27 PM

Ticklers are exactly the same as the above reg. WGP adjustable regs are all pretty much the same.

No difference except maybe your later model reg has some issues.

Tickler reg in that position will also never stay tuned because of the dumb thumb knob.

Grab a micro rock. Check for pinched hoses. Maybe the reg is simply set for too low an output.

mtaylor · 08-29-2008, 02:28 PM

Cool, thanks.

flyweightnate · 08-29-2008, 05:59 PM

Try an SCM-3 perhaps. They're supposed to be VERY fast. Fast enough to run a Matrix in the inline reg position, in one test I saw.

cockerpunk · 08-29-2008, 07:38 PM

just clean it out

should easily keep up.

as someone else said, all WGP regs (like many manufacturers regs) are pretty much part per part the same regs. WGP has only ever made two regs - there LPR and there HPR. just they come in different cans, and might or might not be externally adjustable.

mtaylor · 08-29-2008, 08:09 PM

Pulled it apart, cleaned and oiled it, and it seems quicker now. It's keeping up with 20 BPS ramp as opposed to me outrunning it on semi.

Grimm · 08-30-2008, 02:01 AM

malcolm- I think I have a belsales lpr in my parts kit, I can dig it out next time I see you if you like

Chemical-X · 08-31-2008, 12:35 PM

WGP regs are pretty decent. I think you may like it now that you've cleaned it out.

08-29-2008, 02:15 PM	#1 (permalink)
mtaylor Remember. Join Date: Feb 2008 Location: Edmonton, Alberta	What kind of LPR is this? Attached to the ASA It's having a bit of trouble recharging fast enough to keep up with the noid, thus causing shortstroking. How much of a difference would swapping it with a tickler or a micro rock make? __________________ Not looking for ATS Mags, don't bother PMing me.

08-29-2008, 02:20 PM	#2 (permalink)
BigOldSkool MCB Member Join Date: Jul 2006 Location: Deer Park, NY	Stock one off the later run super stock cockers.. __________________ RIP - Ed "BigDaddy" Roth and "Indian" Larry "Reading APG does not make you an airtech" http://www.myspace.com/eastcoastanarchypaintball

08-29-2008, 02:28 PM	#5 (permalink)
mtaylor Remember. Join Date: Feb 2008 Location: Edmonton, Alberta	Cool, thanks. __________________ Not looking for ATS Mags, don't bother PMing me.

08-29-2008, 07:38 PM	#7 (permalink)
cockerpunk MCB Member Join Date: Jul 2006	just clean it out should easily keep up. as someone else said, all WGP regs (like many manufacturers regs) are pretty much part per part the same regs. WGP has only ever made two regs - there LPR and there HPR. just they come in different cans, and might or might not be externally adjustable. __________________ the ultimate truth in paintball is that the interaction between the gun and the player is far and away the largest factor in accuracy, consistency, and reliability. >>PAINTBALL SCIENCE!<< "Originally posted by Garbageman705: Arguing with Cockerpunk is like fighting a T-Rex. Your going to get your *** kicked."

08-29-2008, 08:09 PM	#8 (permalink)
mtaylor Remember. Join Date: Feb 2008 Location: Edmonton, Alberta	Pulled it apart, cleaned and oiled it, and it seems quicker now. It's keeping up with 20 BPS ramp as opposed to me outrunning it on semi. __________________ Not looking for ATS Mags, don't bother PMing me.

08-29-2008, 02:27 PM	#4 (permalink)
Cunha MCB Member Join Date: Apr 2006 Location: Monterey, CA	Ticklers are exactly the same as the above reg. WGP adjustable regs are all pretty much the same. No difference except maybe your later model reg has some issues. Tickler reg in that position will also never stay tuned because of the dumb thumb knob. Grab a micro rock. Check for pinched hoses. Maybe the reg is simply set for too low an output.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search