P-12 with air leaks - Page 2

howling phantom · 10-14-2006, 10:37 PM

Once you take it apart about 5 times, you can take it apart without worrying anymore. Good luck man.

MrBig · 10-15-2006, 08:54 PM

Ok, attempting to take it apart. No problem with the brass lug, but now I cannot pull the rest out...

Any suggestions?

Latoolman · 10-15-2006, 09:07 PM

If your up to step 9 on that tear down page, you would thread the valve tool on to the valve and the whole thing should come out....
here's a newer picture of the guts....

MrBig · 10-15-2006, 09:52 PM

"gently pull the valve out." is NOT working. yes, I am on step 9. any suggestions on getting the rest of the guts out.

MrBig · 10-15-2006, 10:57 PM

Ok, got it apart. It looks like most that I have taken apart. Both the chamber plug o-ring and the valve guide o-ring need to be replaced.

Do you think that will stop the air leak down the barrel, or should I look deeper.

Thanks for all your help.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

10-14-2006, 10:37 PM	#11 (permalink)
howling phantom Active Member Join Date: Jul 2006 Location: Jax	Once you take it apart about 5 times, you can take it apart without worrying anymore. Good luck man.

10-15-2006, 08:54 PM	#12 (permalink)
MrBig MCB Member Join Date: Apr 2006 Location: East Lansing, Michigan	Ok, attempting to take it apart. No problem with the brass lug, but now I cannot pull the rest out... Any suggestions?

10-15-2006, 09:52 PM	#14 (permalink)
MrBig MCB Member Join Date: Apr 2006 Location: East Lansing, Michigan	"gently pull the valve out." is NOT working. yes, I am on step 9. any suggestions on getting the rest of the guts out.

10-15-2006, 10:57 PM	#15 (permalink)
MrBig MCB Member Join Date: Apr 2006 Location: East Lansing, Michigan	Ok, got it apart. It looks like most that I have taken apart. Both the chamber plug o-ring and the valve guide o-ring need to be replaced. Do you think that will stop the air leak down the barrel, or should I look deeper. Thanks for all your help.