|Ask The Experts You ask the tough questions|
| ||Thread Tools||Search this Thread|
|10-13-2006, 11:26 PM||#6 (permalink)|
Join Date: May 2006
Location: Brandon, Florida
That sounds right, but without seeing it, I really couldn't tell.
I do know any Sheridan cup seal should seal the valve, but I don't know if the pin is removeable or if it's all single-piece.
If you email Palmer's, and tell them you've got a leak down your barrel, they'll help out. They're the experts.
|10-13-2006, 11:28 PM||#8 (permalink)|
Thanks paintjunque. I've used that before and have a bookmark for it. I just need to know which part to get, but I guess I will just have to break down and take the gun apart first. That just means that I need to NOT lose any of the pieces before I put it back together.
|10-13-2006, 11:36 PM||#9 (permalink)|
Loin Falcon Palin
|10-14-2006, 09:11 PM||#10 (permalink)|
Co-Cpt Team Trigger Happy
Join Date: Jul 2006
Location: Zephyrhills, Florida
a bad pierce pin/seal assembly causes leaks down the barrel.
a bad chamber plug face seal will leak from around the front frame screw.
this is what you need:
that kit will also have the chamber plug face seal just in case i'm wrong.
palmers sells these kits as well.
Team Trigger Happy
The Smiley is Everything, Fear the Smiley
Florida Pump Chumps
Big Pumpin' Alumnist-Keep It Strong
|Thread Tools||Search this Thread|