What kind of cocker is this?

Dagon · 12-06-2008, 01:34 AM

Hello MCB. I consider myself a pretty cocker savvy guy but I cannot for the life of me find out what this gun is. Looks like a 32 degrees or a bob long maybe? I don't know.(Added picture of the front block because it has a ying yang on it. Figure it could be more definable by this emblem.)

howdy · 12-06-2008, 01:37 AM

Possibly a WGP Body kit form 98-99? The top milling looks like one of their patters and the bottom does also but i have never seen them together.....

spymongoose · 12-06-2008, 01:37 AM

looks like a kapp mill to me, but its hard to be sure. At any rate, thats a kapp 2k razorback back block, and if thats original, than it might just argue for the kapp origin.

russc · 12-06-2008, 01:40 AM

It's a cold fusion cocker, isn't it?

spymongoose · 12-06-2008, 01:46 AM

^^^ I was under the impression that cold fusions had "Cold Fusion" milled on both sides of the body. good call though, the diamond pattern was very reminiscent them, but I think this is an 00-01 Kapp and older than the cold fusion. Unless I'm wrong, and it does indeed have "cold fusion" milled in the side of the lower tube up front.

Dagon · 12-06-2008, 02:08 AM

Quote:

Originally Posted by russc

It's a cold fusion cocker, isn't it?

I believe it may belong to the p&p family but I just can't nail it down. Never seen this milling before.

Dagon · 12-11-2008, 08:57 PM

ttt. with new pic.

tonloc91483 · 12-15-2011, 10:06 PM

Sorry to resurrect this thread but

Ok that old cocker you were trying to ID a while ago with part of the serial number gone and ying yang on the front block is a PBT Cocker. Paint Ball Toys Cocker.

Produced by Paintball wholesalers in Maryland. Home of the Private label "nasty shocker" and "nasty impulse" if you remember those guns.

It is a stock WGP body that was milled in house and built in house.

I've pmed everyone that might know where it is now. Any idea you know
Thanks Tony

Mirad · 02-06-2012, 10:15 PM

My bad on the thread up. But I wanted to share.

It's quite funny that 4 years later it's in my hands. I got it sometime last year. She is in good hands a little bit longer before I put her up for sell. It hasn't been chopped up xD

12-06-2008, 01:34 AM	#1 (permalink)
Dagon Rec Poster Join Date: Nov 2008	What kind of cocker is this? Hello MCB. I consider myself a pretty cocker savvy guy but I cannot for the life of me find out what this gun is. Looks like a 32 degrees or a bob long maybe? I don't know.(Added picture of the front block because it has a ying yang on it. Figure it could be more definable by this emblem.) __________________ Bidslammer Sucks ''A man's reach must exceed his grasp - else what's heaven for"-Robert Browning Dye Reflex FST Last edited by Dagon; 12-11-2008 at 08:56 PM. Reason: Bringin this one back from the dead

12-06-2008, 01:37 AM	#2 (permalink)
howdy Post Whore Join Date: Dec 2006	Possibly a WGP Body kit form 98-99? The top milling looks like one of their patters and the bottom does also but i have never seen them together..... __________________ LF94Evolution LFEvoTwister RF94BradNestle LF95Sniper RF98Sniper CamoSmartmag IronmanDyeLCD Feedback McarterBrown CustomCockers Pbnation Ebay

12-11-2008, 08:57 PM	#7 (permalink)
Dagon Rec Poster Join Date: Nov 2008	ttt. with new pic. __________________ Bidslammer Sucks ''A man's reach must exceed his grasp - else what's heaven for"-Robert Browning Dye Reflex FST

02-06-2012, 10:15 PM	#9 (permalink)
Mirad Stock Class Playa Join Date: Apr 2009 Location: In my space station.	My bad on the thread up. But I wanted to share. It's quite funny that 4 years later it's in my hands. I got it sometime last year. She is in good hands a little bit longer before I put her up for sell. It hasn't been chopped up xD __________________ mcarterbrown +17/0/-0 customcockers +11/0/-0 customcockers itrader +4/0/-0 PbNation +5/0/-0 For sale:

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

12-15-2011, 10:06 PM	#8 (permalink)
tonloc91483 Active Member Join Date: Apr 2009	Sorry to resurrect this thread but Ok that old cocker you were trying to ID a while ago with part of the serial number gone and ying yang on the front block is a PBT Cocker. Paint Ball Toys Cocker. Produced by Paintball wholesalers in Maryland. Home of the Private label "nasty shocker" and "nasty impulse" if you remember those guns. It is a stock WGP body that was milled in house and built in house. I've pmed everyone that might know where it is now. Any idea you know Thanks Tony