mcarterbrown.com  

Ask The Experts You ask the tough questions

Reply
 
Thread Tools Search this Thread
Old 11-04-2006, 04:51 PM   #1 (permalink)
Post Whore
 
Gabe's Avatar
 
Join Date: Mar 2006
Location: Chugiak, AK
Send a message via MSN to Gabe

12 gram efficiency Q

Do 12 grams work better when feeding the valve liquid or gas? I've noticed that lots of guns (PGPs, dropout equipped nelsons) have the cartridge in such a way that it looks like it would feed liquid rather than gas. Are these actually feeding liquid?
__________________
"There's nary a beast that can outrun a greased-up scotsman!" - Willie

"What makes a VM so charming is that you can chop down small trees with it" - Jaan
Gabe is offline   Reply With Quote
Old 11-04-2006, 07:05 PM   #2 (permalink)
Active Member
 
howling phantom's Avatar
 
Join Date: Jul 2006
Location: Jax
Send a message via AIM to howling phantom

Well, I think that in the liquid state, co2 has more energy. If you put the same amount of volume of c02 in liquid form instead of gas, it will shoot harder and at a higher FPS. If you fill the chamber full of liquid, you use alot of the 12 gram. I think you want it to be gas state.

But, I could be wrong. Im not a wiz on how air and c02 works, so I could be wrong.

Good luck.
howling phantom is offline   Reply With Quote
Old 11-04-2006, 08:20 PM   #3 (permalink)
B
Retro grouch
 
B's Avatar
 
Join Date: Mar 2006
Location: Lynn, Ma

Vaporized/ atomized liquid in Nelsons small piercing holes help with the effect. Power tubes and liquid CO2 are not a good mix for longevity.

Sheridan valves want more gas than liquid but remember the valve chamber is twice as small as a Nelson. The gas must also take a 90 deg turn so some liquid is needed to get the best efficiency.
__________________
Quote:
Originally Posted by Azzy;

I think we are being hit by a tsunami of stupidity.
Paintball is a game of honor, play it that way!

Nelson Owners Group

RIP Grifyn
B is offline   Reply With Quote
Old 11-09-2006, 01:44 PM   #4 (permalink)
Seasoned Member
 
Lenny's Avatar
 
Join Date: Aug 2006
Location: Akron area, Ohio

All this science stuff hurts my head...
__________________
Quote:
Originally Posted by pizzaluvr View Post
I have a girlfriend... I just think porn looks better than her.
SUPPORT YOUR LOCAL PRO SHOP!!
Underground Sports
Hudson Drive in Cuyahoga Falls, OH.
(330)923-8916
"More Cool Crap than a Frozen Septic Tank"

AO Feedback
MCB Feedback
Lenny is offline   Reply With Quote
Old 11-09-2006, 02:24 PM   #5 (permalink)
Active Member
 
sniper1rfa's Avatar
 
Join Date: Jul 2006

Technically, yes, a valve being fed liquid would be more efficient...

ASSUMING it is well controlled, and that all the liquid boils off and then expands most of the way before the ball leaves the barrel.

This is fairly hard to acheive. Most of the time, in a nelson design, the powertube, valve, and peircing pin serve to boil off the co2 well before it reaches the ball. Basically, you wouldnt know if that is happening or not, unless you made a clear gun which would allow you to see the co2 boil off and where it happens. If it happens after the valve, you'd be doing well. before the valve would be a problem.
sniper1rfa is offline   Reply With Quote
Old 11-09-2006, 06:52 PM   #6 (permalink)
Banned
 
Join Date: Jul 2006
Location: Czech Republic (middle Europe)

Valve going on liquid will be more efficient, because liquid CO2 has more energy density, so you will have better air flow with the same tubing and you can shorten and speed-up the valve operation to get the same fps. But short after you deplete some part of liquid CO2 in powerlet, you will have droup out - because you can not use the siphon tube in powerlet, separating the liquid CO2 is very difficult here... the only posible solution will be perhaps the reversed vertical setup, but that is very uncomon :-).

So, shortly, going on liquid with powerlets is best for efficiency only in beginning, with your first shoots, where you can hold the liquid in the valve. But the goal of efficiency tuning is comonly totally different - hold consistent performance at longest... and there is a lot better going on gas CO2... best with "short" vertical setup - powerlet placed in the grip like in case old Nellspot 007 or 3357 Spotmarker where you will have the gas CO2 good separated and you will have on the other side not affected the unintendet expansion in the marker like in case of Phantom VSC for exception.

Best will be go with vertical setup on Low pressure with small in-build reg - you can use a lot more of the gas fill in the powerlet with great consistency, even after is the liquid CO2 depleted. This is imho the way how make the most efficient stock class marker... and Sheridans are imho better for that than nelsons.

Last edited by 3022; 11-09-2006 at 07:05 PM.
3022 is offline   Reply With Quote
Old 11-09-2006, 10:05 PM   #7 (permalink)
GWC Lifetime Member
 
Al Ray's Avatar
 
Join Date: Mar 2006
Location: Grand Junction, Colorado

Quote:
Do 12 grams work better when feeding the valve liquid or gas
Gas

The valve itself is adiiferant story, as technicly, it would work better on liquid, however the co2 would be depleted within 10 shots for a 12 gram.

B has the best answer reguarding stock guns. With a little tinkering you can get the sheridan valve to work better on gas alone, but again as B has stated, you have that 90 degress turn still, even though you can change the length of the radius, and thus make flow better.

Generaly speaking, run 12 grams in the vertical possition.
Al Ray is offline   Reply With Quote
Old 11-09-2006, 10:20 PM   #8 (permalink)
starts off small at first
 
splattttttt's Avatar
 
Join Date: Apr 2006
Location: Bean Town, U.S.A.

Quote:
Originally Posted by Al Ray View Post
Gas

Generaly speaking, run 12 grams in the vertical possition.
Best 12g efficiency I've ever gotten from them was in from the horizontal position. Basically speaking... Drop out changers.
I would expect the issue has more to do with Sheridan vs. Nelson valves.
Nelson wins again.
__________________
"Democracy is the worst form of government except for all the others which have been tried." Winston Churchill

THE-SHOOTIST Anyone chubbin' like me for this?
mailmanmike Since Monday! That's more than 4 hours though, so according to those cialis ads I should see my doctor.
tlane77 I think for a non-chemical chubby it's 6 hours before its time to see a doctor. So you should be good for another couple hours.
splattttttt I wasn't goin to google "chubbin" because I assumed it had to do with fat. The lard type, not the fun stuff. But what ever feelings Jeff's experiencing, then they must be of the fun like stuff...
tlane77 He's got a woody for your woods.
splattttttt land
splattttttt is offline   Reply With Quote
Old 11-09-2006, 10:31 PM   #9 (permalink)
GWC Lifetime Member
 
Al Ray's Avatar
 
Join Date: Mar 2006
Location: Grand Junction, Colorado

^ Nelson valve chamber is huge when compared to a sheridan, thus the liquid has more time and space to expand into a gas.

There is also the temperature varible, as at 0 degress I can get 10 usable shots out of a factory springed stock nelspot, if I pump easly. I get 8 with factory springs( same gun in fact) but with a horizontal changer. Actualy did this as a test a year ago just for kicks. Also the heat from your hand around the 12 gram/grip will boost the shot count by 1-2 shots vs just pulling the trigger.
Al Ray is offline   Reply With Quote
Old 11-09-2006, 10:45 PM   #10 (permalink)
GWC Lifetime Member
 
Al Ray's Avatar
 
Join Date: Mar 2006
Location: Grand Junction, Colorado

Some food for thought :

R744 is CO2



Fixed now

Also, heres one thats more painball specific


Last edited by Al Ray; 11-09-2006 at 10:54 PM.
Al Ray is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » Ask The Experts

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 12:52 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC