mcarterbrown.com  

Ask The Experts You ask the tough questions

Reply
 
Thread Tools Search this Thread
Old 12-02-2006, 02:30 AM   #11 (permalink)
Rec Poster
 
phaserburn's Avatar
 
Join Date: Sep 2006

Excellent. Thats just what I was looking for.

I have about 2-3 things I changed / fixed tonight. I *think* that will do it. I will give it a try tomorrow and hope for the best. If not, its going back to ATS.

I also ended up taking the cog out of the 85 reciever and put it in the 10 reciever to I can play with it tomorrow.

Thanks again for all the help and replies!



It going to be COLD and FUN tomorrow .
phaserburn is offline   Reply With Quote
Old 12-02-2006, 02:32 AM   #12 (permalink)
Post Whore
 
Walker's Avatar
 
Join Date: Apr 2006
Location: Spokane, WA

Quote:
Originally Posted by phaserburn View Post
Walker, thanks for the picture!

Is the metal supposed to be flush with the top of the plastic? The metal on both my mags are about 3/16th an inch ABOVE.

Thanks!
3/16ths is too much... Mine is about 1/16th....

A Loudener! Watch out eardrums!



Walker
Walker is offline   Reply With Quote
Old 12-02-2006, 02:34 AM   #13 (permalink)
Rec Poster
 
phaserburn's Avatar
 
Join Date: Sep 2006

yeah, I figured as much. I will take the needlenose and "curl" it further down.
phaserburn is offline   Reply With Quote
Old 12-02-2006, 03:22 AM   #14 (permalink)
Crom's Favorite Son
 
RoBo's Avatar
 
Join Date: Jul 2006
Location: MN

I would also replace the guide plate if you have a spare -

RoBo
__________________
When Lightning Strikes DAMAGE Is Done!
RoBo is offline   Reply With Quote
Old 12-02-2006, 11:44 AM   #15 (permalink)
Seasoned Member
 
Gumby's Avatar
 
Join Date: Apr 2006

Wow so many replies all throughout the night. You will need to replace the guide plate for sure. If the magazine spring guide is sticking up too far it will be caught between the bolt and the sleeve assembly which will tear the seal. You can bend it back round and then push it down. To bond the seal back on to the bolt use Loctite 410 if you can find it. Make sure to clean the bolt off with acetone first to remove any oil or paint. Don't get it on the seal or it will swell.
Gumby is offline   Reply With Quote
Old 12-02-2006, 01:15 PM   #16 (permalink)
Devious Penguin Mod
 
Surge-NS's Avatar
 
Join Date: Mar 2006
Location: Brookfield, IL
Send a message via AIM to Surge-NS

CCM Fan
Nice stock for a pistola. Did you make it yourself?
__________________
Team Aggressive UWL
Loved by most, feared by many.

Aggressive! Kill!

http://www.mcarterbrown.com/forums/image.php?type=sigpic&userid=50&dateline=121202619  6
Surge-NS is offline   Reply With Quote
Old 12-02-2006, 09:00 PM   #17 (permalink)
Rec Poster
 
phaserburn's Avatar
 
Join Date: Sep 2006

Ok gents. Indeed many quick replies, all of which helped. I replaced the cog, bolt seal, guide plate, and put a helicoil in the grip frame for the grip screw.

I had a break every 30 rounds or so (its not the indexing, only an average), due to poor paint. In fact my ATS was the only gun that could shoot that, my 68 special was chopping every 3, hence how I knew it was the paint.

The stock is oh so nice. I was made by stainlessbutcher here on the forum for me. Its set up that I only have to point at the target and that is where it shoots. I made several long ball, through the bunker slot, type shots with it this weekend: easy target aquisition. Send him a pm, it was a sinch to do! There are more pictures of it in my gallery. Since then, its all black now (rattle can), and I added felt on the inside of the "U" so it doesnt cut up my arm.


Thanks again all!
Jeremy Lamonte
phaserburn is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » Ask The Experts

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 05:45 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC