-   Ask The Experts (
-   -   PGP Question (

Allfat 01-12-2007 02:58 PM

PGP Question
So we were having a pump only day last weekend and I was playing with a CCM Sniper. I decided to shake things up a little and pull out my PGP. So I screwed in the 12g, dry fired it to pierce the 12g, and nothing really happened. So I took the 12g out and it had a VERY small hole in it, and it was still leaking out CO2 when I threw it in the trash. I tried it again, and this time it pierced it fine, but all the air leaked out around the grip. Any ideas as to what I could do to fix this problem.

BTW, I dont have much experience working on the PGP so please be as specific as possible. Thank you.

c6quad 01-12-2007 03:11 PM

if air leaked out around the front trigger frame screw, the chamber plug face seal is bad and needs to be replaced. it's the seal that touches the face of the 12 gram.

you'll need a valve tool to take the valve out to replace it.

edit- you'll need a valve tool only if it's an old style valve.

russc 01-12-2007 03:22 PM

Did you really crank down the 12gram changer? If you put it in like a wimp, those things tend to happen.

Allfat 01-13-2007 07:25 PM

Yeah, the 12g changer was all the way in. I will replace the face seal and see how that works, thanks.

All times are GMT -4. The time now is 09:28 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC