Velocity issue

Treadstone · 07-15-2007, 08:57 PM

So I'm reaching out for some help as I've reached the end of my know how. I cannot get the velocity on my AT85 about 270. I've run through the troubleshooting part of the manual and managed to get it from 230ish up to the 270s but thats it. Its being feed from a 850psi Crossfire HPA tank and everything checks out based upon the troubleshooting specs. Any help would be great.

Gumby · 07-16-2007, 08:14 AM

First thing that comes to mind is the bolt seal being gone. That will drop 75-100fps off your max but from the sounds of it you already checked that. Another place to look would be to make sure you are actually getting the 850psi output from the bottle. Next check to make sure that the hammer is not sticking or dragging in the sleeve.

07-15-2007, 08:57 PM	#1 (permalink)
Treadstone MCB Member Join Date: Apr 2006 Posts: 766	Velocity issue So I'm reaching out for some help as I've reached the end of my know how. I cannot get the velocity on my AT85 about 270. I've run through the troubleshooting part of the manual and managed to get it from 230ish up to the 270s but thats it. Its being feed from a 850psi Crossfire HPA tank and everything checks out based upon the troubleshooting specs. Any help would be great. __________________ MCB feedback XIII Legionnaires

07-16-2007, 08:14 AM	#2 (permalink)
Gumby MCB Member Join Date: Apr 2006 Posts: 218	First thing that comes to mind is the bolt seal being gone. That will drop 75-100fps off your max but from the sounds of it you already checked that. Another place to look would be to make sure you are actually getting the 850psi output from the bottle. Next check to make sure that the hammer is not sticking or dragging in the sleeve. __________________ I'm Gumby, Damnit! Damage Inc! Spring Pump Event - Best game ever

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search