mcarterbrown.com  

ATS AT-85 AT-10 AT-6 AT-4

Reply
 
Thread Tools Search this Thread
Old 10-03-2013, 01:21 PM   #1 (permalink)
Resident ATS Enthusiast
 
lordkyleofearth's Avatar
 
Join Date: May 2010
Location: San Antonio, Tx

ATS custom barrel / barrel rethread vendor list

I just spoke with Super_Stanchy in the airsmith section and he quoted me these prices for rethreading barrels to ATS threads. $25 for the primary threads or $30 for both sets (primary and unisizer)
It is a really good price, given some of the other numbers I have seen. Plus he is a reputable board member, so I'm not afraid to send him my parts. I'm posting this here for the benefit of future owners who are in need of an aftermarket barrel solution.

The first person to use his service will have to send a useable barrel to him to copy, after that he will have the program saved and ready to roll. He should be able to make darn near anything work for our markers, I'd imagine the price wouldn't jump significantly if the outter barrel body needed some milling as well. There is no minimum order size.

Quote:
Originally Posted by Super_stanchy
it wouldnt be hard to add a 2nd thread cycle to the programming (just a little more fine tuning and tweaking)

i could do single thread for $25, both for $30
If anyone finds another person who is willing/able to do the work, please post here so that future owners can benefit.
lordkyleofearth is offline   Reply With Quote
Old 10-04-2013, 11:44 PM   #2 (permalink)
Need to learn how to CNC
 
Join Date: Oct 2009
Location: Seattle, Washington

Thank you thank you Thank you thank you Thank you thank you!!
jjron99 is offline   Reply With Quote
Old 10-08-2013, 10:33 AM   #3 (permalink)
Resident ATS Enthusiast
 
lordkyleofearth's Avatar
 
Join Date: May 2010
Location: San Antonio, Tx

Paintballer50505 says he can make an ATS to autococker adapter for $35. He would need both a marker and a barrel to ensure proper fit. He said that freak boring the insert is also a possibility (no more unisizer).
lordkyleofearth is offline   Reply With Quote
Old 10-09-2013, 04:00 AM   #4 (permalink)
Active Member
 
semoakivla's Avatar
 
Join Date: Jul 2011

i had two ATS barrel with freak insert, the both have broke on the same spot because the thread become to fin.
semoakivla is offline   Reply With Quote
Old 11-11-2013, 03:33 PM   #5 (permalink)
Resident ATS Enthusiast
 
lordkyleofearth's Avatar
 
Join Date: May 2010
Location: San Antonio, Tx

SSC now has the programming to bang out ATS barrels, with unisizers. My hammerhead rethread, including turning part of the OD down to fit in the ATS body was $35.

That I know of, this is the second of only two Hammerhead rifled ATS barrels out there. Final length is just under 12" with approximately 9" of rifling.
lordkyleofearth is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » ATS

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 06:11 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC