At-4 and Qloader

Centurin · 03-31-2008, 10:25 PM

Hey guys. I did some searching and this seems to be the place for ATS discussions. I just recently bought an AT4 and I want to put a qloader on it similar to this pic

I ordered the custom mounting kit as well. Are there any issues I should know before I hook it up? Also do you guys know the recommended number of prewinds that I should use? I don't want to force feed the magazine and screw up the chain.

My last question is what type of gun oil do you typically use for the At4?

LoudThunder · 04-01-2008, 01:30 AM

Cant help with the qloader stuff.
But Use ATS oil in your marker.
Using any other oil can screw your marker up.

snipeo101 · 04-03-2008, 06:38 PM

just us the recommended 12-16 i use 13 and it feeds great. you should have no problems with it.

i've been using angel love juice and its been great, and just switched to the pps synthetic.

even though i'm spending $10 per ounce of oil all you really need is a good fully synthetic oil
natural oils make the o-rings swell.

i know the mentality to spend allot on oil sense you just spent 400-700+ on your gun set up but i have 2 ats on pps synthetic and i have never had a problem.

but loudthunder and gumby and ats pros/insiders so...

good luck, hope you love the gun.

tmart747 · 04-04-2008, 01:53 AM

If you feed the clip directly through the vl tube you will need to glue a piece of plastic L (tape or cd case) between the 1st link in chain to prevent the q loader from back feeding to 1st spot on chain causing a bind and possible damage to lugs. You just want the balls to feed 1 on top of the next in the 2nd spot on chain.

I use 13 prewinds with my set up and it works great.

Centurin · 04-04-2008, 04:18 PM

You wouldn't happen to have a pic of that, would you?

Centurin · 06-04-2008, 08:04 PM

Quote:

Originally Posted by tmart747

If you feed the clip directly through the vl tube you will need to glue a piece of plastic L (tape or cd case) between the 1st link in chain to prevent the q loader from back feeding to 1st spot on chain causing a bind and possible damage to lugs. You just want the balls to feed 1 on top of the next in the 2nd spot on chain.

I use 13 prewinds with my set up and it works great.

I've been trying to get a visual picture of this in head, but can't quite understand it.

03-31-2008, 10:25 PM	#1 (permalink)
Centurin Newbie Join Date: Mar 2008 Posts: 13	At-4 and Qloader Hey guys. I did some searching and this seems to be the place for ATS discussions. I just recently bought an AT4 and I want to put a qloader on it similar to this pic I ordered the custom mounting kit as well. Are there any issues I should know before I hook it up? Also do you guys know the recommended number of prewinds that I should use? I don't want to force feed the magazine and screw up the chain. My last question is what type of gun oil do you typically use for the At4? __________________ There's a fine line between being a hero, and being a memory - Optimus Prime

04-01-2008, 01:30 AM	#2 (permalink)
LoudThunder Rec Poster Join Date: Jun 2007 Posts: 48	Cant help with the qloader stuff. But Use ATS oil in your marker. Using any other oil can screw your marker up. __________________ Where do you go at night when the Demons come? http://www.northerncommandpaintball.com

04-04-2008, 04:18 PM	#5 (permalink)
Centurin Newbie Join Date: Mar 2008 Posts: 13	You wouldn't happen to have a pic of that, would you? __________________ There's a fine line between being a hero, and being a memory - Optimus Prime

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

04-03-2008, 06:38 PM	#3 (permalink)
snipeo101 Rec Poster Join Date: Jun 2007 Posts: 42	just us the recommended 12-16 i use 13 and it feeds great. you should have no problems with it. i've been using angel love juice and its been great, and just switched to the pps synthetic. even though i'm spending $10 per ounce of oil all you really need is a good fully synthetic oil natural oils make the o-rings swell. i know the mentality to spend allot on oil sense you just spent 400-700+ on your gun set up but i have 2 ats on pps synthetic and i have never had a problem. but loudthunder and gumby and ats pros/insiders so... good luck, hope you love the gun.

04-04-2008, 01:53 AM	#4 (permalink)
tmart747 Newbie Join Date: Mar 2008 Location: Great NW Posts: 7	If you feed the clip directly through the vl tube you will need to glue a piece of plastic L (tape or cd case) between the 1st link in chain to prevent the q loader from back feeding to 1st spot on chain causing a bind and possible damage to lugs. You just want the balls to feed 1 on top of the next in the 2nd spot on chain. I use 13 prewinds with my set up and it works great.