mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 11-17-2012, 07:42 PM   #1 (permalink)
Not A Noob!
 
c.shank's Avatar
 
Join Date: Jul 2012
Location: central PA

05 black magic wont cycle

Gun worked fine....rebuilt the regulator, it has the stock black magic hpr......i replaced the piston seat ( the urethane seal the small spring sets on ) the original had a hole through the center, the new one didnt, my question is does it need the hole? The problem is the gun cycles very slowly and sometimes not at all, I tried turning up the lpr but it started to vent, so i turned it back down, replaced the battery with a new one...still nothing. Any help or opinions will be appreciated. Thanks.
__________________
If you don't have a plan of your own, You'll be part of someone else's
http://www.mcarterbrown.com/forums/f...-feedback.html
05 E2 Black Magic
04 SF Pro Stock
03 Yakuza Outkast
c.shank is offline   Reply With Quote
Old 11-17-2012, 07:59 PM   #2 (permalink)
BAZINGA PUNK!!!
 
[MOOSE]'s Avatar
 
Join Date: Nov 2009
Location: Elko, NV
Send a message via Yahoo to [MOOSE]

Brass and Wood Fan
Try adjusting the 3way. That's what it sounds like to me.
__________________
By 2012 we thought we would have flying cars, all we have is blankets with sleeves.
You don't seem to understand, BRO. It's a Shotgun, that shoots Rockets, BRO!!!!!!
Feedback
Long distance member of: Team Long Stroke (It's like a long distance relationship only better)
[MOOSE] is offline   Reply With Quote
Old 11-17-2012, 08:12 PM   #3 (permalink)
Not A Noob!
 
c.shank's Avatar
 
Join Date: Jul 2012
Location: central PA

its got a worrblade, hence no 3 way adjustment...i didnt mess with anything except changing the piston seat in the hpr
__________________
If you don't have a plan of your own, You'll be part of someone else's
http://www.mcarterbrown.com/forums/f...-feedback.html
05 E2 Black Magic
04 SF Pro Stock
03 Yakuza Outkast

Last edited by c.shank; 11-17-2012 at 08:17 PM.
c.shank is offline   Reply With Quote
Old 11-18-2012, 09:55 AM   #4 (permalink)
BAZINGA PUNK!!!
 
[MOOSE]'s Avatar
 
Join Date: Nov 2009
Location: Elko, NV
Send a message via Yahoo to [MOOSE]

Brass and Wood Fan
Put the old piston seat back in and see if that changes anything. Was there a reason you rebuilt the reg? Or did you just want to rebuild it?
__________________
By 2012 we thought we would have flying cars, all we have is blankets with sleeves.
You don't seem to understand, BRO. It's a Shotgun, that shoots Rockets, BRO!!!!!!
Feedback
Long distance member of: Team Long Stroke (It's like a long distance relationship only better)
[MOOSE] is offline   Reply With Quote
Old 11-18-2012, 12:11 PM   #5 (permalink)
Not A Noob!
 
c.shank's Avatar
 
Join Date: Jul 2012
Location: central PA

the gun has been sitting for a while....rebuilt entire gun, think i found problem, dont know why, but the bolt o rings swelled to the point that the bolt could not hardly move, changed bolt o rings, put it training mode and went through about 100 cycles flawless, gonna shoot it today over the chrony, will post results later, thanks.
__________________
If you don't have a plan of your own, You'll be part of someone else's
http://www.mcarterbrown.com/forums/f...-feedback.html
05 E2 Black Magic
04 SF Pro Stock
03 Yakuza Outkast
c.shank is offline   Reply With Quote
Old 12-05-2012, 11:00 AM   #6 (permalink)
Active Member
 
Darkapollo's Avatar
 
Join Date: Mar 2010
Location: New Cumberland, PA

You didnt get any DOW55 on them did you?
__________________
Feed Back Link
Darkapollo is offline   Reply With Quote
Old 12-06-2012, 09:26 PM   #7 (permalink)
Not A Noob!
 
c.shank's Avatar
 
Join Date: Jul 2012
Location: central PA

no...i dont have any 55.....happened again after that, during a game lately, had just over 500 shots on counter and gun failed to cycle, bolt was tight, changed rings again, works great, dont know the deal but kinda sucks
__________________
If you don't have a plan of your own, You'll be part of someone else's
http://www.mcarterbrown.com/forums/f...-feedback.html
05 E2 Black Magic
04 SF Pro Stock
03 Yakuza Outkast
c.shank is offline   Reply With Quote
Old 12-09-2012, 12:02 AM   #8 (permalink)
Active Member
 
Darkapollo's Avatar
 
Join Date: Mar 2010
Location: New Cumberland, PA

Where in central PA are you?
I could take a look at it.
__________________
Feed Back Link
Darkapollo is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » Autocockers

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 10:03 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC