mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 01-21-2013, 01:33 PM   #1 (permalink)
Active Member
 
Join Date: Dec 2011

autococker build part list?

So I would like to build a autococker pump from the ground up.I plan to get this body


here is what I know it is possibly a 2k1 what i've been told

"Midblocked body. Very clean, professionally done midblocking job. I decided to do the ego feedneck mod myself and the dremel ran down the side of the body, marring the anno finish, pictured. Comes with bolt, sled-style backblock and midblock length pump arm."by seller

What other parts do I need besides a trigger frame,regulator and pump kit?List of parts would be great thanks.Also maybe short description of parts that are upgrades.

What regulator should I get for it.I would like to be able to switch from pump to a regular autococker because I haven't tried pump play yet.

NEW QUESTION for the pump kit will any center guide rod work on any type of pump handles?

Last edited by nuthb606; 01-22-2013 at 09:53 AM.
nuthb606 is offline   Reply With Quote
Old 01-21-2013, 01:50 PM   #2 (permalink)
Rec Poster
 
Join Date: Nov 2009
Location: Norway

you do not need anything else than those you mentioned, if you dont have the lower tube kit, not to sure from the pic
valve spring
valve
hammer
hammer spring
ivg
and the two screws for the valve

and if you want to make it mechanical you need

frontblock
frontblock banjo bolt
ram
lpr
3way
and hose
simenaa is offline   Reply With Quote
Old 01-21-2013, 02:01 PM   #3 (permalink)
Active Member
 
Join Date: Dec 2011

awesome thanks would this work, if i were to get it new ? Check It Mid Block/Half Block Autococker Lower Tube Kit

or used this work? + a mid block hammer they have for sale
WGP Autococker Lower Tube Valve Kit Freeflow ANS Macdev Akalmp | eBay
nuthb606 is offline   Reply With Quote
Old 01-21-2013, 02:10 PM   #4 (permalink)
Spoon
 
Zanied's Avatar
 
Join Date: Feb 2010
Location: Ga

CCM Fan
Brass and Wood Fan
The first one will work, the second one looks like stock wgp internals and the hammer is not slotted for a mid block. The check it is maybe a slight upgrade im not sure, but it has the slotted hammer for the mid block.
__________________
Feedbackhttp://www.mcarterbrown.com/forums/f...-feedback.html
Quote:
Originally Posted by Meph View Post
C'mon, this is America. You know some of that "time better spent elsewhere" is playing paper football and scoping out milfs. Productivity is never 100%. America.
Zanied is offline   Reply With Quote
Old 01-21-2013, 03:36 PM   #5 (permalink)
Active Member
 
Join Date: Dec 2011

Ok so if i get a pump kit I will have to get different length rod right? If so what size? Thanks for the help guys
nuthb606 is offline   Reply With Quote
Old 01-21-2013, 03:58 PM   #6 (permalink)
Total wreath
 
Join Date: Feb 2009
Location: Las Vegas

CCM Fan
Half block size. Or cut it and re thread it your self
shredxcam is offline   Reply With Quote
Old 01-21-2013, 04:45 PM   #7 (permalink)
Active Member
 
Join Date: Dec 2011

i found the half block sizes on paintballgateway but it says 2k5? will those work even though it says 2k5

Last edited by nuthb606; 01-21-2013 at 04:58 PM.
nuthb606 is offline   Reply With Quote
Old 01-22-2013, 09:54 AM   #8 (permalink)
Active Member
 
Join Date: Dec 2011

new question up... still don't know operating pressure of autococker?
nuthb606 is offline   Reply With Quote
Old 01-22-2013, 10:59 AM   #9 (permalink)
Rec Poster
 
Join Date: Nov 2009
Location: Norway

it dependt, to crono cockers screw in the ivg 2-3 times from flush, and increase the pressure from the reg until peaks. adjust the ivg if necessary
simenaa is offline   Reply With Quote
Old 01-22-2013, 11:07 AM   #10 (permalink)
The Man With No Plan
 
super_stanchy's Avatar
 
Join Date: Nov 2008
Location: Oregon City, OR

CCM Fan
Quote:
Originally Posted by nuthb606 View Post
new question up... still don't know operating pressure of autococker?

about 300 psi, each valve/spring combo has its own actual pressure

most are between 225-400psi

i normally set my reg to a scosh over 300, IVG 2.5 turns from flush
if im within 20fps, i adjust with IVG
if im not within 20, i adjust with my reg
super_stanchy is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » Autocockers

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 10:41 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC