-   Autocockers (
-   -   another gx-e question (

tenchustealthx 02-10-2013 03:11 PM

another gx-e question
More curiosity than anything, will a pump auto trigger kit work with the eye covers on? Or does the cam arm pivot too far back? Thought I would ask.

Darkapollo 02-13-2013 11:08 AM

I highly doubt they will work together. The GX-e eye covers are kinda thick/wide.
Why do you have eye covers on a pump/why do you want an auto-trigger on an electro?

tenchustealthx 02-14-2013 07:09 PM

Got a gxe and have been having non stop annoying problems with. Wondering if I could make it a pump or try to get it fixed somewhere. Knowing me the gun just hates me(my luck with autocockers).

Darkapollo 02-15-2013 09:53 AM

I know one or two things about raceguns..
Whats up with it?

tenchustealthx 02-16-2013 03:24 PM

Purchased the gx-e and during shipping the ram got bent bad enough that it required pliers to pull open. I replaced the ram and then couldn't get my computer to see the board. Made sure that both com's were set to the same port, still no dice. So I decided to see how it shoots in classic mode and after about 30 shots the sear solenoid stopped tripping. Come to find out a wire had pulled out of the plug going into the board and must have been barely contacting for those thirty shots.In order to fix the wire I took out the solenoid and a little metal plate fell out. Solenoid now clicks and feels strong but I'm not sure how the little piece goes back in because it clicks but doesn't trip the sear when cocked. My luck with pretty much all autocockers I have owned....that's what the mag on the wall is for I guess. can take pick of little piece if needed.

Dysturbed87 02-16-2013 05:59 PM

That metal piece (cannot remember the correct name) is used to make a small space between the sear noid and roller cage. With that gap it gives the sear noid pin enough room to travel and hit the roller cage with enough force to move it. With that it will drop the sear and release the hammer

tenchustealthx 02-16-2013 08:25 PM

So how does this
go into gripframe
If I can get it shooting I can atleast play in classic mode while I figure out while why it hates my computer or usb to serial adapter.

Dysturbed87 02-16-2013 08:40 PM

Post #4 gives some instruction...its called the free kick mod. Someone did a video of how to do this properly (I actually think it was darkapollo)

It was dark that did the is the link to it. If the reading doesn't make sense then this will take away any confusion

tenchustealthx 02-16-2013 10:28 PM

Thanks a lot. The gun is firing again. Now if I could get my computer and it to communicate I would be set.

Dysturbed87 02-16-2013 10:55 PM

What OS are you running? I have only had luck getting the software to run on xp with a USB to serial cable. Over on CC nuke has been able to get it working with vista and win7. Might need to go there and fins out from nuke how to get it working on other OS

All times are GMT -4. The time now is 04:19 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC