mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Autocockers (http://www.mcarterbrown.com/forums/autocockers/)
-   -   Ivg thread question (http://www.mcarterbrown.com/forums/autocockers/228098-ivg-thread-question.html)

Valafar 03-06-2013 03:07 PM

Ivg thread question
 
I've got an older pre 2k body that I want to midget but it does not have a screw in ivg, it has one of the big blocks that bolts in. So I'm wanting to know what threads those are and where to buy a tap.

Thanks guys!

rats 03-06-2013 08:14 PM

Thread is 3/4-16

Look on amazon or ebay if you want

Vermont American 20035 3/4-Inch 16 High Carbon Steel Machine Screw Plug Tap - Amazon.com

For any other information about thread
Autococker Parts Identification Guide Photo Gallery by Kenneth MacDowell at pbase.com

ih8cornnuts 03-07-2013 03:17 PM

I've got one laying in my tool box if you want it. It's practically brand new and always kept in a case.

addicted2dunes 03-09-2013 02:30 PM

If you are midgeting make sure not to thread it too deep.... You'll run into problems with your hammer hanging up in the threads.


All times are GMT -4. The time now is 07:53 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC