mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 04-10-2013, 06:57 PM   #1 (permalink)
Seasoned Member
 
Join Date: Apr 2007
Location: Silver Springs, Fl

I have some questions about cockers

I once read where Nelson spring kits were used for Cocker spring kits ? are the big springs used at the back for velocity adjustment reasons ? Also, will they work on Trilogy's ?

I was alos reading about something called a roller sear, what is the benefit to this ? I just recently bought a halfblocked Trilogy Comp and while fiddling with it last weekend, I was impressed with how accurate it was and I'm having second thoughts about converting it to a pump now, it's small, light and fun as hell to shoot.
DamoNAN is offline   Reply With Quote
Old 04-10-2013, 11:58 PM   #2 (permalink)
Post Whore
 
danssoslow's Avatar
 
Join Date: Sep 2011

Consider that my experience is new with these; but what I've found so far with the Trilly is that you will need both a Cocker spring kit (all but the valve spring) and Spyder spring kit (loong springs for the valve) if you plan on tuning/messing with both the valve and hammer springs. I have tinkered with my Spyder Hammer's springs with the springs in a Cocker kit; but don't recall which springs it was I was swapping in. I do remember that the cocker spring was a little longer than the spring it replaced.

I have two slide frames right now, one with an Extreme Paintball roller trigger and sear, and a conventional chromed trigger plate and sear. After setting the tolerance in the adjustment screws on the Benchmark frame with the conventional guts, the difference in how smooth the pull is is negligible compared to the other frame with the roller guts. This was judged messing around at home, looking for a difference. I'd imagine in the middle of a game, I couldn't tell you the difference at all.
danssoslow is offline   Reply With Quote
Old 04-11-2013, 11:17 AM   #3 (permalink)
Seasoned Member
 
Join Date: Apr 2007
Location: Silver Springs, Fl

Thanks danssoslow. I was looking a an Extreme Rage roller sear/trigger and wondered if the bearings actually made a difference. I will be upgrading my composite frame to a Benchmark frame after I get the the Trilly going. I like the lightness of the composite frame as do a few others that have held it.
DamoNAN is offline   Reply With Quote
Old 04-11-2013, 01:00 PM   #4 (permalink)
Midget Enthusiast
 
cfos00's Avatar
 
Join Date: Jul 2008
Location: Washington, DC
Send a message via AIM to cfos00

Avoid the Extreme Rage plates. They rust and they wear badly. Go with a belsales, shocktech, or the like if you're going to go with a roller sear. They're really smooth, and you won't have to worry about durability. If you go non-roller, go plated. A nicely annoed plate may look good, but they aren't anywhere near as smooth. It's not worth it.

Nelson spring kits are compatible with some cockers, but not a trilly. If you want a spring kit, grab a cocker maddman kit. They're easy to find, and should have you covered (except for the valve).
__________________
My feedback:
http://www.mcarterbrown.com/forums/f...-feedback.html

Need a Centerflag Uprising manual? PM me.

My Shooters
http://www.mcarterbrown.com/forums/c...ollection.html
cfos00 is offline   Reply With Quote
Old 04-11-2013, 02:03 PM   #5 (permalink)
Seasoned Member
 
Join Date: Apr 2007
Location: Silver Springs, Fl

What about the WGP roller sear ?
DamoNAN is offline   Reply With Quote
Old 04-11-2013, 06:18 PM   #6 (permalink)
Midget Enthusiast
 
cfos00's Avatar
 
Join Date: Jul 2008
Location: Washington, DC
Send a message via AIM to cfos00

Should be just fine. Basically just stay away from the Extreme Rage. They took a great idea and executed 3/4 of it. They really should have just hardened the plates. Shame.
__________________
My feedback:
http://www.mcarterbrown.com/forums/f...-feedback.html

Need a Centerflag Uprising manual? PM me.

My Shooters
http://www.mcarterbrown.com/forums/c...ollection.html
cfos00 is offline   Reply With Quote
Old 04-11-2013, 09:48 PM   #7 (permalink)
Seasoned Member
 
Join Date: Apr 2007
Location: Silver Springs, Fl

Thanks cfos00. You live in DC ? Ever played in Rock Creek Park, lol
DamoNAN is offline   Reply With Quote
Old 04-12-2013, 12:14 AM   #8 (permalink)
Midget Enthusiast
 
cfos00's Avatar
 
Join Date: Jul 2008
Location: Washington, DC
Send a message via AIM to cfos00

Ha, doubt that would go so well. I have a feeling it would lead to some interesting conversations with unfriendly men.
__________________
My feedback:
http://www.mcarterbrown.com/forums/f...-feedback.html

Need a Centerflag Uprising manual? PM me.

My Shooters
http://www.mcarterbrown.com/forums/c...ollection.html
cfos00 is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » Autocockers

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 12:55 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC